Wagner Power Painters are painting tools that act as large, air-powered spray cans. They can significantly speed up large and tedious painting projects, such as painting your house. Wagner power painters can also paint your house more efficiently than with a manual paint roller. These power painters typically consist of a container to hold the paint, a tube that draws the paint up through a plastic filter, a device to cause the paint to flow towards the power painter’s nozzle and a spray nozzle. Using a Wagner Power Painter is easy, as long as you follow some basic instructions.
Video of the Day
Determine When to Use a Power Painter
Wagner Power Painters definitely look appealing in television advertisements when you see a single man paint his entire house in what seems like less than 15 minutes. The reality is that a power painter is not always the right tool for the job, particularly since it requires extra care when cleaning at the end of the job. For some projects, though, nothing beats a Wagner Power Painter.
Consider buying a Wagner Power Painter for your paint job if it is one that is really large, time-consuming and physically strenuous to paint by hand. An example of such a job is painting your entire house from top to bottom. Smaller jobs, on the other hand, such as painting cabinet doors, are often completed more easily using traditional painting utensils. Learning to recognize the right tool for the job is an important skill for any painter, so start by considering whether or not a Wagner Power Painter is the best tool for the painting project you are working on.
Operating Tips and Instructions
Before starting your painting project, carefully assemble your power painter by filling the reservoir with paint and screwing it onto the Wagner Power Painter. Inspect the nozzle at this time to make sure there is no lint or debris present, and put down tarps around your intended painting area.
Try to use your Wagner Power Painter on a hot, sunny day, so the paint will dry faster. If you use a cordless Wagner Power Painter, check the batteries the night before to see if they need to be charged. Nothing is worse than running out of paint mid-project. If your Wagner Power Painter plugs into a wall outlet, make sure you have enough extension cord to reach all of the areas you will be painting.
If your project is very large, keep several replacement nozzles and spray tips handy because it is very likely that yours will need to be replaced mid-project, and you don’t want to be running to the hardware store for replacements. The nozzles are made of plastic and simply snap into place, although on some Wagner Power Painters they will need to be screwed, turning them clockwise to put them on and counterclockwise to remove them.
Use broad, sweeping motions to paint with the Wagner Power Painter. Hold the painter so that the nozzle is at least 12 inches from the surface being painted. Ideally, you will be able to hold the nozzle even further from the surface, up to 36 inches away. This will allow you to have a wider spray pattern, making the job go faster. This is what allows the Wagner Power Painter to complete jobs quickly.
When you finally finish painting, clean up fairly promptly, or paint could dry where you don’t want it to. Use a garden hose with a high pressure attachment to clean off all your equipment immediately after use. If you don’t thoroughly clean your painter after you finish your project, it could get clogged up and be useless for future jobs.