DIY Statue of Liberty Party Hat for Kids

Save

The Statue of Liberty is an iconic representation of the United States of America. Show your patriotism and have fun doing it with this simple hat. Wear it to a parade or make up your own parade!

DIY Statue of Liberty hat
(Nici Holt Cline)

Things You'll Need

  • Cardboard
  • Marker
  • Green and/or gray paint
  • Paintbrush
  • White glue
  • Scissors
  • Measuring tape
  • Webbing or ribbon
  • 4-inch piece of 1" wide elastic
  • Dark colored fabric or paper
  • Needle and thread (or sewing machine)
Step 1

Assemble supplies. Many things can be substituted for the items pictured. The webbing could be ribbon or fabric. The cardboard could be card stock or stiff felt. Use paper instead of fabric for the front embellishment. Be creative and use materials you already have.

assemble supplies
Nici Holt Cline
Step 2

Using a measuring tape (the webbing would work too!), measure your child's head. Cut the webbing two inches short of the head circumference. For example, this child's head is 20". So the webbing was cut to 18".

measure kid's head
Nici Holt Cline
Step 3

Draw seven pointy triangles on the cardboard. Make sure all seven will fit on your webbing with room at each end. Paint in the triangles - this is the perfect job for a little helper. Let dry. Cut out the triangles and paint the reverse side.

draw, paint and cut out the triangles
Nici Holt Cline
Step 4

Generously apply white glue to one side of the webbing. Attach all seven triangles in a row, leaving at least one inch of webbing on each end (this is where the elastic will be attached).

glue triangles
Nici Holt Cline
Step 5

Using the dark fabric or paper, cut out small rounded rectangles (windows) for the front of the webbing. The rectangles should be slightly smaller than the width of the webbing. Attach to the front of the webbing with glue.

attach windows to front of webbing
Nici Holt Cline
Step 6

Using a needle and thread or sewing machine, attach elastic to one of the pieces of webbing, overlapping by one inch. Stitch in a big "M" to ensure a secure connection.

attach elastic
Nici Holt Cline
Step 7

Repeat Step 6 on the other end, forming a circle. The finished circle should be the exact measurement of the child's head.

complete hat
Nici Holt Cline
Step 8

And now you're done. Wear and enjoy!

don the hat
Nici Holt Cline
Promoted By Zergnet

Comments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!