How to Make a Floor Pouf

eHow may earn compensation through affiliate links in this story.

Instead of spending hundreds of dollars on a store bought pouf, DIY one using an inexpensive canvas drop cloth and acrylic paints. Easy enough for an advanced beginner to tackle, the best part is you can customize the look to fit your personal style.

Floor pouf
Image Credit: Jill Sparks

Things You'll Need

  • One 6-by-9-foot canvas drop cloth

  • Measuring tape or ruler

  • Scissors

  • Acrylic paints

  • Paintbrush (if custom mixing colors)

  • Wine cork (or stamp of choice)

  • Cardboard or paper plates for paint mixing

  • Two packages of piping

  • Pins

  • 24 ounces of polyester stuffing

  • Heavy-duty thread

  • Hand-sewing needle

  • Sewing machine with zipper foot and denim needle

Supplies (polyester stuffing not pictured)
Image Credit: Jill Sparks

Step 1: Cut Out the Pattern Pieces

There are three pattern pieces: two circles and one long rectangle. The finished measurements of this pouf are 18 by 12 inches.


If you want to change the dimensions, start with the circle size and multiply it by pi (3.14). Add 1/2 inch to the circle's dimension and 1 inch to the rectangular piece, both length and width, to account for seam allowances.

Cut out the rectangle at 13 inches by 57.5 inches.

To make the circles, take the drop cloth and fold it in on itself twice.

Folded on itself twice
Image Credit: Jill Sparks

Step 2: Mark a Quarter-Circle

Take your measuring tape, line it up on the corner, and mark at the 9.25-inch increment. Move the measuring tape, in small increments, continuing to mark at 9.25 inches until you have a quarter-circle marked. Cut out along the marked line. Repeat for the second circle.


If you do not have a measuring tape, a regular ruler can be used as well.

Mark at 9.25 inches
Image Credit: Jill Sparks
Quarter circle marked
Image Credit: Jill Sparks

Step 3: Stamp Your Fabric

Get a thin film of paint on the wine cork but not enough to clump. Play around on your cardboard or paper plate until you get the consistency you want. Stamp your fabric with the wine cork.


Put something under your fabric, or paint outside, so as not to damage your floor.

Stamping the pattern pieces
Image Credit: Jill Sparks
Pattern pieces stamped
Image Credit: Jill Sparks

Step 4: Sew the Strip Together

With short, right sides together, use a 1/2-inch seam allowance and sew the long strip together, leaving a gap approximately 4 inches long in the middle. The hole allows you to turn the pouf inside out and provides a place to stuff it. After sewing, press to set the stitches.

Leave a 4-inch gap in the middle.
Image Credit: Jill Sparks

Step 5: Pin the Piping

Pin the piping on the right sides of the circular pieces, raw edges together, overlapping the ends of the piping.

Pin the piping
Image Credit: Jill Sparks

Step 6: Sew the Piping to the Circular Pieces

Switch to your zipper foot. Sew the piping onto the circular pieces as close to the piping edge as possible. Trim the piping where it overlaps, and press after sewing to release any wrinkles and set the stitches.

Sew the piping to the circle.
Image Credit: Jill Sparks

Step 7: Pin Round Pieces to the Rectangle

Join the round pieces with the sewn rectangle. Take one of the circular pieces and pin it to the strip, right sides together, matching the raw edges.

Pin a round piece to the strip.
Image Credit: Jill Sparks
Pinned, raw edges matching
Image Credit: Jill Sparks

Step 8: Sew the Pieces Together

Sew the pieces together, using your previous thread line where you attached the piping as a guide. Sew directly on top of the stitching. Repeat for the other round piece, and press after sewing to set the stitches.

Sew directly on top of your previous thread line.
Image Credit: Jill Sparks

Step 9: Stuff the Pouf

When both round pieces are joined to the strip, turn the pouf right-side out and stuff with the polyester filling.

Stuff the pouf
Image Credit: Jill Sparks

Step 10: Close the Hole

After your pouf is stuffed, it's time to close the hole using a ladder stitch, also known as a hand slip stitch. It will create a neat, invisible stitch.

Thread your hand needle and knot (double knot if it feels more secure). Bring your needle up into the fold on the top, right side of the hole, pulling until you reach the knot. Now your knot is hiding in the fold.

Pull needle up through the fold
Image Credit: Jill Sparks

Directly across from where the needle comes out, push the needle into the opposite fold to create a stitch, approximately 1/8 inch long.

Create a stitch on the opposite side.
Image Credit: Jill Sparks

Now go back to the opposite fold and repeat the process.

Back to the opposite side
Image Credit: Jill Sparks

As you continue, pinch the folds together, working down the opening.

Pinch the folds together
Image Credit: Jill Sparks

When you reach the end, insert the needle into the opposite side of where the last stitch came out, and knot. Double knot if it feels more secure. Clip the thread.

The hole is closed.
Image Credit: Jill Sparks

You're Done

Put your feet up; your stylish new pouf is finished.

Pouf all finished
Image Credit: Jill Sparks