How to Make Paper Look Like Leather

Save
Achieve the look of leather with paper.
Achieve the look of leather with paper. (Image: leather close up image by Dmitry Rukhlenko from Fotolia.com)

For centuries, decorative paper was made by hand and used in objects from the exquisite endpapers in books to one-of-a-kind stationery to painstakingly hung wallpaper. Embellishing paper is inexpensive and quick, and design possibilities are practically endless. There are many easy ways to make plain paper into faux leather, but by taking a little extra time, you can pull off the look and even the feel of leather almost as easily as crumpling tissue paper.

Things You'll Need

  • Tissue paper (tan or brown)
  • Freezer paper (white or brown)
  • Iron
  • Ironing board
  • Acrylic matte varnish
  • Small flexible paintbrush

Crush the tissue paper into a tight ball, squeezing it all the way around. Smooth it out again, being careful not to tear it as you flatten it.

Ball the paper up as tightly as possible before smoothing it out.
Ball the paper up as tightly as possible before smoothing it out. (Image: crumpled paper image by Alexey Klementiev from Fotolia.com)

Turn the iron on high. Put the freezer paper with its shiny side up on the ironing board. Place the wrinkled tissue paper on top of the freezer paper, covering it completely. Pass the iron across the papers several times, fusing the two together. The iron should come in direct contact with the tissue paper only, and not with the freezer paper, which remains beneath the tissue paper. Keep the iron moving swiftly so as not to burn the paper. The papers are fully melded together once there are no air pockets and the edges and corners have bonded completely.

Use the iron on high heat to meld the papers together.
Use the iron on high heat to meld the papers together. (Image: iron image by Robert Grzywaczewski from Fotolia.com)

Brush the paper thoroughly with acrylic varnish, top-side (tissue paper) up. The varnish reinforces the paper while at the same time gives it the feel of real leather. Allow the varnish to dry to the touch before using the paper.

Use a flexible brush to apply the varnish.
Use a flexible brush to apply the varnish. (Image: paintbrush #4 image by Adam Borkowski from Fotolia.com)

Tips & Warnings

  • When using the iron to fuse the tissue paper to the freezer paper, the wrinkles will be ironed completely flat, but the paper will still have the look of a supple leather.
  • Before applying the acrylic varnish, you may choose to add a few drops of acrylic paint to tint it, thus adding depth of color to the faux leather.
  • Before ironing the papers together, make sure the steam function on the iron is off and there is no water inside it, as steaming the paper will remove most of the wrinkles.
  • Work in a well-ventilated area while applying the acrylic varnish.

References

  • “Hand Decorating Paper”; Marie Browning; 2000
Promoted By Zergnet

Comments

You May Also Like

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!