How to Make a Decoupage Serving Tray

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Plain serving tray

  • Scrapbook paper, variety of patterns

  • Scissors

  • X-acto knife and cutting surface (optional)

  • Craft glue

  • Water

  • Small dish

  • Foam paintbrush

  • Sharpie paint marker

  • Cut glass the size of the tray bottom or matte spray sealer

All you need is paper and glue to give that bland tray a facelift.
Image Credit: Carrie Waller

Serving trays add style and sophistication to your space. They are both functional and pretty and help to corral even the most wayward of accessories — anything from party supplies to favorite jewelry. Put your own stamp on a plain tray by incorporating a bit of decoupage medium and cut paper details, plus a custom saying that speaks to you.


Step 1

Start by choosing patterned paper in a cohesive color scheme.
Image Credit: Carrie Waller

When gathering patterned paper for this project, work intentionally with a specific color palette or design style. This will help pull the pieces together visually. Scrapbook paper works best because of its thickness.


Video of the Day

Step 2

Use sharp scissors to carefully cut out the details that will later be added to the tray.
Image Credit: Carrie Waller

Use scissors to cut out shapes and designs from the patterned paper. If scissors prove to be too cumbersome for smaller detail cuts, use an X-acto knife and cutting surface.


Step 3

Lay out the design prior to gluing everything down.
Image Credit: Carrie Waller

Lay the shapes on the tray as you cut them, filling in areas of the tray that feel too empty or bare. Overlap shapes in some areas to add dimension and interest.


Step 4

Don't be alarmed if your paper curls and stretches while gluing.
Image Credit: Carrie Waller

Fill a dish with a combination of 3 parts craft glue to 1 part water and stir well. Use a foam paintbrush to apply this decoupage medium to the underside of each cut piece of paper, and then lay it in place on the tray. Smooth out any bubbles and curling edges.


Step 5

There is no "wrong way" to design this project.
Image Credit: Carrie Waller

Place and hold the palm of your hand down flat on top of each piece of paper for at least 30 seconds before moving on to the next piece of paper. This will ensure that the adhesive holds the paper to the surface of the tray.



Step 6

A cursive message in the center of the tray adds personalization.
Image Credit: Carrie Waller

Add an extra touch by hand-writing a message onto the surface of the tray using a Sharpie paint pen. This could be a favorite quote or phrase or the recipient's monogram.


Step 7

A glass shop can custom-cut a piece to your specific dimensions.
Image Credit: Carrie Waller

Finish the tray by adding a piece of cut glass on top of the center section, right over the paper details and written phrase. Two coats of matte spray sealer could take the place of the glass. Whatever method you use, this will help to ensure that your crafted design stays safe from liquids and scratches.


You may adjust the water to glue ratio of your decoupage mixture if needed. The solution should be loose but not runny.

Don't be alarmed by initial wrinkling. This will dissipate as the decoupage medium dries.


Report an Issue

screenshot of the current page

Screenshot loading...