Brushed Metal Glaze Wall Painting Technique

Save

Transform drywall to mimic a metal wall by adding metallic paint and glaze. Metallic paints come in a variety of shades, from traditional bronze and copper to modern jewel tones such as blue turquoise and ruby red. Metallic paint is made from small pieces of mica. For the most reflective qualities to be seen on the wall, there must be adequate light. Both natural and artificial light allow the newly painted metallic wall to glow.

Wall Preparation

  • To prepare the wall to be painted, wash it with a large sponge and warm water if a large amount of dirt is visible on the surface. A clean wall allows paint to adhere better. Vacuum spider webs from the ceiling line and corners of the room to avoid them mixing with the paint during the project. Apply 2-inch painter's tape to all surfaces where paint should be avoided, and press the tape firmly onto baseboards, door frames and ceiling lines so paint does not seep underneath. Lay all drop cloths evenly on the floor, making the drop cloths smooth and free of wrinkles.

Base Coat

  • Use dark brown or black latex paint to apply a dark base coat. The dark base color is necessary because any shade of metallic paint from pearl white to dark bronze is extremely translucent. The base coat should cover the wall surface entirely and evenly. The base coat is commonly applied using a roller. Apply pressure evenly and steadily. Be prepared to apply more than one coat.

Metallic Paint

  • Always apply metallic paint in a random, organic direction instead of in vertical or horizontal rolls. Roll on the paint and overlap sections when applying. Do not trim out the edges of the wall because a visible brushed-on look will be seen around the perimeter. Instead, use the roller and go directly to the edge of the wall. Roll on coats of metallic paint until a solid metallic wall results.

Glazing

  • For the glaze, mix together metallic paint and clear glaze in a 1-2 ratio. Use a paintbrush to apply the glaze to the wall for a brushed technique. Experiment with different brushed-on looks using a piece of cardboard or scrap wood. Other tools such as sponges, newspaper and plastic bags also can be used. Cover the area only one time with glaze, and do not go back into an area to fix mistakes if the glaze has set for more than one minute.

Finishing Project

  • Always allow glaze to dry for 24 hours prior to moving items back in a room. Keep traffic to a minimum while glaze dries to avoid accidental touches. Add additional lighting in the room by using accent and interior lights for the metallic wall to shine.

References

  • "The Art of Faux: The Complete Sourcebook of Decorative Painted Finishes;" Pierre Finkelstein; 2007
  • Photo Credit Hemera Technologies/AbleStock.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Paint Brushed Aluminum

    A basic, bonding primer is adequate for preparing most surfaces for proper paint adhesion. However, because metallic surfaces are slick and non-porous,...

  • How to Paint on Metal Art

    Painting metal can be a tricky task, but following a few simple steps will make the process simple and as efficient as...

  • How to Paint a Metal Wall Decor

    Metal wall decor can add a special touch to any room, but the colors do not always match your existing decorating scheme....

  • How to Apply Metallic Glaze on Walls

    A metallic glaze placed over a base coat of paint provides an eye-catching metallic sheen, adding a layer of luster that can...

  • Valspar Metallic Paint Glaze Directions

    Valspar's line of Faux Finish paints and glazes give you an excellent opportunity to add a special touch to your paint job....

  • Metallic Interior Paint Colors

    Interior metallic paints are made by combining metallic pigment powders with latex interior paint. You can purchase the pigment powders separately and...

  • Tips on Applying Metallic Paint

    If you want to add shimmer to your walls, then metallic paint could be the right choice for you. You can decide...

  • Valspar Faux Techniques

    Valspar is a brand of paint that offers a variety of colors and finishes to help you customize your home. Creating faux...

  • Faux Metallic Painting Techniques

    Actual metal wall coverings, tabletops or decor pieces may prove too expensive or completely impractical for your latest room-revamp project. Instead of...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!