Wood Ceiling Refinishing

Save

The problem with refinishing a wood ceiling is that when you sand the wood, you get a face full of wood dust and particles. The good news is that you can refinish your wood ceiling with minimal sanding and still end up with a high-quality result. If you are planning to refinish your wood ceiling, you should know about the tools, materials and techniques required for a successful outcome.

Preparation

  • Move all furniture out of the room and open as many windows as possible. Cover the entire floor with painter's plastic held in place with masking tape. It's best to work from a rolling scaffold; however, sawhorses and 2-by-10 boards can serve as scaffolding, too.

Finish Removal

  • Apply paint/finish stripper to the surface of the ceiling using a paintbrush. Work with your arms extended away from your face to prevent stripper from dripping into your face. You should wear goggles, a dust mask and rubber gloves to protect yourself from the stripper.

    Once the ceiling has been coated with stripper, allow it to set for 30 minutes, then remove the finish residue with a putty knife. Scrape the surface of the ceiling well, and wipe away excess stripper and residue using a heavy-grit wool pad. The wool pad will help smooth the surface, too. Reapply the stripper if need be. If the natural wood surface is visible and no slick finish remains, you don't have to apply additional finish.

    Sand the surface of the ceiling using 120-grit sanding screen. You can attach the screen to an orbital sander or hand sand using a sanding block. You won't need to do much sanding; the purpose of this step is just to smooth the surface.

Refinishing

  • Refinish the ceiling using gel stain and a cotton rag. Tape up all borders surrounding the ceiling with blue painter's tape to avoid getting stain on trim or surrounding walls. Wipe away any excess stain with a cotton rag and apply polyurethane finish, such as gloss, semigloss or satin, with a paintbrush or spray can.

    As an alternative, apply milk paint or interior latex paint to the ceiling using a roller and trim brush.

Related Searches

References

  • Wood Finishing and Refinishing; Creative Homeowner Press; 1982.
  • Ultimate Guide to Floors, Walls & Ceilings: Build, Remodel, Repair; Fran J. Donegan; 2007.
Promoted By Zergnet

Comments

You May Also Like

  • How to Refinish Wood Furniture

    Refinishing basically involves three procedures: stripping the old finish, sanding and preparing the wood, and applying a new finish. Preparation greatly influences...

  • How to Sand Wood

    Sanding is a part of a process that can't be rushed if you want your project done right. The following will show...

  • How to Repair and Refinish Textured Ceiling

    Textured ceilings, or popcorn ceilings, are a cheap and easy way to finish your ceilings. These type ceilings are easy to stain,...

  • How to Refinish Interior Cedar Wood Walls

    Over the years interior cedar walls can become dull, dirty and damaged. There is no need to take the cedar down or...

  • How to Refinish V Groove Wood Floors

    Solid hardwood floors can be refinished several times before they need replacing. However, V groove floors can only be refinished once or...

  • How to Refinish Wood Interior Doors

    Worn and scratched interior doors can detract from an otherwise attractive décor. Regular polishing is enough to keep up with day-to-day maintenance,...

  • How to Sand-Blast Wood

    Sandblasting can resurface or shape wood in minutes. It's efficient, but is typically done only by professionals. It requires a steady hand...

  • How to Make Painted Ceiling Beams Look Like Wood

    Take advantage of the ceiling beams in your room by making them a focal point. Make your painted beams look like wood...

  • How Can I Finish My New Wood Ceiling?

    Applying a finish to wood ceilings prevents darkening with age and damage from smoke and grease stains. The species of wood used...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!