How to Install Metal Roofing Panels around a Stack Pipe

Save
Next Video:
Roofing Safety Tips....5

Learn how to install roofing panels around a stack pipe in this free roofing instruction video.

Part of the Video Series: How to Roof a House
Promoted By Zergnet

Comments

Video Transcript

This produces the most universal and efficient method while providing good and long term performance. Panels are cut to provide a 1/2 inch of clearance around the pipe to allow for movement. Cut the flashing one size under the pipe diameter. The flashing can then be form fitted and set in a solid bed of allmet caulking. It can then be stitch screwed to the panel maximum 2 inches on center. The panel is cut to fit over the stack, again allowing for movement. A standard neoprene or a metal jack flashing is then placed over. A short piece of panel is cut with a slightly larger hole to counter flash a jack flashing. The next course of panel can now be laid through. For aesthetic purposes we recommend painting or coating the exposed stack end flashes.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!