How to Fix Noisy Stairs

Save

Noisy stairs aren't a cause for alarm. Often, the squeak is the result of a loose stair tread. Stair treads can be tightened by hammering two nails at opposing 45 degree angles into the stringer. An alternative to hammering into the tread is to tap shims into the loose stair tread joints from the underside of the stairs. The latter option requires access to the underside of the stairs, which is not always an option for homeowners. Nail holes can be filled, sanded and touched up for a seamless and squeak-free repair.

Things You'll Need

  • Hammer
  • Box, finish nails
  • Nail set
  • Wood putty
  • Putty knife
  • Fine-grit sanding pad
  • Wood finish
  • Touch-up brush
  • Wood shims

Finish Nails

  • Identify the squeaky stair tread or treads on your stairs. Hammer one finish nail at 45-degree angle that is pointed toward the front edge and one that is pointed toward the back edge of the stairway through the squeaky tread into the stringer on each end. Locate each nail approximately 2 to 3 inches in from the edges.

  • Center a nail set on each nail head and tap it with a hammer to set each nail approximately 1/16 inch below the surface of the wood.

  • Fill the nail holes with wood putty using the edge of a putty knife. Allow the wood putty to dry for 24 hours.

  • Sand the wood putty flush with the surface of the wood using a fine-grit sanding pad in the direction of the wood grain.

  • Touch up the filled nail holes with a matching wood finish using a small touch-up brush. Allow the finish to dry at least 24 hours before walking on the stairs.

Wood Shims

  • Find the noisy stair treads and assess them from the under side of the stairs.

  • Slide a wood shim under each stair tread between the risers and stringers if there is a gap.

  • Tap the shim with a hammer until it is tight at each gap. Walk up and down the stairs. Add more shims as needed until the stairs are quiet.

References

  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Quiet Squeaky Stairs

    Squeak, squeak, squeak . . . it can really get to you after a while, so why not fix that troublesome tread?...

  • How to Fix a Stair Tread

    Broken or worn stair treads are a giant safety hazard. Stair treads covered with rubber or vinyl can become cracked or warped...

  • How to Repair a Noisy Toilet

    When your toilet's refill valve, sometimes known as a ballcock, is not working properly, you can find yourself dealing with a noisy...

  • How to Fix a Noisy Laptop Fan

    The fan inside a laptop computer keeps air circulating and keep its cool. A noisy fan results if the assembly is not...

  • How to Repair a Broken Stair Tread

    Over time stair treads can break or become damaged from repeated use. The area of the tread that receives the most traffic...

  • How to Fix Cracks in Wooden Stairs

    Small cracks can develop in wooden stairs over time. While these cracks will not cause an unsafe stairway, it is important to...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!