How to Heat up a Bumper to Repair


Many bumpers on modern vehicles are made from plastic, not chrome, as they commonly were in the past. When heat is applied to certain materials, such as plastic, they become pliable. This characteristic makes repairing a plastic bumper easier because of its ability to be reformed. Heating a bumper prepares it for a repair and reduces the risk of cracking it. Heat is not normally applied to chrome bumpers. Most chrome bumpers are sent to a professional to be rechromed or replaced.

Things You'll Need

  • Heat lamp
  • Heat gun
  • Plastic welding kit
  • Inspect the damage on the bumper. Looking for cracks and dents will determine what type of repair you need to make and what type of heat you should use. Cracks and dents require different types of heat.

  • Direct the heat from the heat lamp to point at the bumper so the bumper can warm (automotive heat lamps are found at auto body suppliers). The heat lamp will warm the bumper and help to maintain the temperature of the work area. If the area cools, the plastic become less flexible and difficult to repair.

  • Use a heat gun on the damaged area; heat guns can be bought at auto body suppliers or hardware stores. Turn on the heat gun, and run it back and forth across the damaged area until it becomes flexible. Do not make the area so hot it becomes untouchable.

  • Reach behind the bumper, and attempt to push out the dent from the back. Some dents are more easily removed than others. Not all dents can be removed this way, but you can use this technique to get most of the dent removed before you finish the rest of the repair.

  • Turn on your plastic welder to warm it. Use your welder to repair any cracks in the damaged bumper. Your plastic welding kit should come with plastic rods to repair the crack. These seal any cracks in the bumper.

  • Use the flat part of the iron to press against the plastic rod and bumper. Take your time running the iron across the cracked area. The heat from the welder will become hot enough to melt the plastic rods and bumper together to seam in the crack and make it whole.

Tips & Warnings

  • Old plastic bumpers might be too brittle to repair. You might find an old bumper cracks easily and is less susceptible to flexing.
  • Heat lamps and heat guns give off a high amount of heat that can be dangerous if you do not protect yourself. Wear gloves to protect your hands from high temperatures and glasses to shield your eyes from debris. Shop coveralls can protect your body from any plastic that might melt and drop on you.

Related Searches

  • Photo Credit red car image by Istvan Ferge from
Promoted By Zergnet


You May Also Like

  • How to Repair a Vinyl Car Bumper

    Those textured vinyl bumper covers on your car or SUV sure take a lot of abuse, and damage of some type is...

  • How to Remove Dents With a Heat Gun

    Having a dent removed from your car can be very expensive. Each dent in your car could easily run you $50 to...

  • How to Plastic Weld a Bumper

    The front or rear bumper sits out in the open and can be the car's first component to receive a bump, graze...

  • How to Repair a Rear Bumper

    Plastic bumpers are found on many vehicles today, which makes bumper repair easier to do at home. Metal and fiberglass bumper repair...

  • How to Repair a Rubber Car Bumper

    Rubber bumpers tend to discolor over time and collect signs of damage, such as scratches, nicks and cracks. The good news for...

  • How to Blacken Bumpers

    Black bumpers can appear faded after a few years of constant exposure to the elements. Wax and polish can also build up...

  • How to Straighten a Bent Metal Bumper

    A bent or dented metal bumper ruins the appearance of your car. Unlike scuff marks, scratches and paint chips, a bent bumper...

  • How to Weld Polyethylene

    Polyethylene is a type of high-density plastic that is used to make kayaks, aquariums, hauling tanks, pipes and drain culverts. It can...

  • How to Fix Fading on Plastic

    You exhaust your energy and time protecting the shine of your car from the elements. Mud, rain, sleet and snow do little...

  • Rear Bumper Dent Repair Tips

    Your car's rear bumper probably is the area most likely to get bumped or dented at some point. Most bumpers on cars...

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!