How to Build a Grand Piano Skid Board


Moving a grand piano, which can weigh as much as 1,500 pounds, can be difficult. The size and delicacy of a piano makes special moving equipment such as a skid board important. A padded board with straps and wheels, the skid is used to lay the piano --- either a baby grand or grand --- on its side. The piano is then strapped to the board. Although they are available from many moving companies, skid boards can also be made at home.

Things You'll Need

  • 2 or 3 sheets of 3/4-inch marine grade plywood
  • Tape measure
  • Hand saw
  • Resin glue
  • Jigsaw
  • Wood glue
  • Hammer
  • Nails
  • 2 hardwood runners
  • Power drill
  • Screws
  • Lay a piece of 3/4-inch marine grade plywood on the ground. Cut it into three or four 16-inch by 28-inch long panels.

  • Remove two pieces of the cut plywood. Apply a thin layer of resin glue to one of the pieces of plywood. Lay the other piece directly on top of the glue and press down. Wait about 24 hours for the glue to dry completely.

  • Cut two slats into the plywood, one on the left and one on the right side of the board, using a hand saw or jigsaw. These will be used to pass the straps through to support the piano.

  • Cut a small piece of wood that is 16 inches long and 3 or 4 inches wide. This will form the lip of the skid. Squeeze a line of wood glue onto the wood and attach it at one end of the skid. Hammer two to three nails into the wood lip to further secure it. This will help stop a piano from sliding.

  • Turn the plywood over and place one hardwood runner on each side of the plywood. Squeeze a line of glue onto each runner and press it firmly onto the plywood. Drill two screws into each runner to make sure it is secured to the plywood.

Tips & Warnings

  • If needed, adjust the length of the skid to accommodate the full length of the piano.
  • The straps should be long enough to secure the entire piano. Use multiple straps if necessary.

Related Searches


  • Photo Credit player piano on black image by Pix by Marti from
Promoted By Zergnet


You May Also Like

  • How to Move a Grand Piano

    Grand pianos are fragile; they're more expensive and they certainly weigh more than upright pianos. It's best to have a professional piano...

  • How to Move a Baby Grand Piano

    Whether you're moving a baby grand piano from one room to another or from one state to another, it's delicate, time-consuming work....

  • How to Build a Piano

    Making pianos is a long and difficult process. Pianos of high-quality are an artisan product that can take many years to produce....

  • How to Move a Piano

    If you need to move a piano, hopefully you'll have professional help available. If you decide to ask friends, you will have...

Related Searches

Check It Out

12 Tiki Essentials to Turn Your Bar Cart Into a Tropical Paradise

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!