How to Build a Concrete Foundation With Pavers for a Shed

Save

The ideal location for a shed is on top of a stable surface. A pad created out of concrete pavers provides a stable surface with drainage that can fully support the weight of a wood or metal shed without sagging. Building the cement paver pad is a simple matter of digging out the area, pouring out gravel and sand for a subsurface and laying out the pavers. This can be a weekend project with the advantage that it can be walked on immediately after installation.

Things You'll Need

  • Marking paint
  • Pavers
  • Masonry wet saw
  • Shovel
  • Tamper
  • Crushed gravel
  • Cement sand
  • Push broom
  • Rubber mallet
  • Level
  • Plastic border
  • Metal ground stakes
  • Mark the area for the paver pad with marking paint. Lay out the pavers in the area to gauge the dimensions. Mark any pavers that need cuts to fit the dimensions and pattern. Cut the pavers with a masonry wet saw.

  • Dig out the area within the marks to a depth equal to the pavers plus 3 inches. Compact the soil after digging with a hand tamper -- a long pole with a flat, heavy base and two handles on the side -- or a mechanical tamper available for rent from hardware stores.

  • Pour a 1-inch depth of crushed gravel onto the compacted ground. Compact the gravel and check the level to ensure the surface is flat and smooth. Repeat with 2 inches of concrete sand.

  • Lay out the pavers in the desired pattern over the concrete sand. Check the level of each paver with regard to the surrounding pavers. Tap the pavers down with a rubber mallet to obtain the proper level and to ensure each top is flush with the surrounding pavers.

  • Stretch a plastic border tightly around the installed pavers. Anchor the border to the ground with metal ground anchors hammered through the holes in the plastic border.

  • Sweep concrete sand into any joints between the pavers with a push broom. Dampen the surface of the concrete pavers with water to solidify the sand in the joints.

Related Searches

References

  • Photo Credit Jupiterimages/liquidlibrary/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Build Shed Foundations

    A backyard shed is a useful storage space, but it becomes much less useful if it's falling over due to a failed...

  • How to Build a Garden Wall With Paver Stones

    Until recently, creating garden walls was a task meant only for a professional or a capable do-it-yourselfer. Messy concrete and deep trenches...

  • How to Prepare for Concrete Pavers

    Concrete pavers, whether used for walkways, patios or driveways, all require essentially the same ground preparation before installation. You much create a...

  • Shed Floor Using Patio Stones

    Cement pavers, or patio stones, offer a customizable appearance to a sturdy and stable pad. The paver or stone structure, if assembled...

  • Design Ideas For Bricks & Pavers

    Brick and paver designs applications in landscaping and hardscaping direct placement and installation of concrete and paver surfaces designed for automobile and...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!