The mirror in your bathroom cabinet is usually set in a frame that makes the cabinet door. Disassemble at least one side of the frame to remove the mirror, but if an adhesive was used to set the mirror in place, the mirror must be separated from the glue before it can be replaced. Use caution when handling the mirror so that it does not break.
Things You'll Need
- Tape measure
- Utility knife
- Flathead screwdriver
- Small wood chisel
- New mirror
- Heavy-duty gloves
Wear protective goggles and clothing. This will help prevent injury from glass or wood splinters while you work with the mirror and the cabinet door frame.
Unhinge the bathroom cabinet door from the cabinet. Support the door as you unscrew the hinge screws with a drill. Lay the door on a flat, clean work surface.
Inspect the points where the frame meets the mirror for adhesive glue. If you notice the glue, carefully test it to see if it still has a strong bond. Score the bond with a utility knife, and see if the mirror separates easily. If not, use a hot blow-dryer to melt the glue.
Separate the backing from the frame, and pry up the tacks holding the mirror down on the inside of the door.
Gently pry the frame pieces apart at a corner with a wood chisel or a flathead screwdriver, if the mirror is fitted inside of the frame molding.
Remove the bathroom cabinet mirror from the frame. Gently slide it out, and try to leave it in tact.
Measure the width and length of the old mirror, and inspect its thickness. This makes it easy to have the new mirror cut to the exact measurements of the old one.
Order a new mirror for the bathroom cabinet. With the measurements in hand, the new mirror should be a perfect fit.
Insert the new mirror into the frame. Slide it into the grove that supports the mirror. Secure the mirror by pushing down the staples or tacks that held it in place if it was mounted on the back of the door.
Reconnect the framing if you had to pry it apart to remove the old mirror. Apply wood glue to the join, and tack the two frame parts together with the frame tacks.
- Photo Credit bathroom image by nutech21 from Fotolia.com
How to Replace a Recessed Medicine Cabinet
Recessed medicine cabinets sit in a hole in the drywall above the sink. They are secured to a wood framework with screws....
How to Replace a Bathroom Medicine Cabinet
If you're seeking a new look for your bathroom, replacing the medicine cabinet may be all you need to do. Replacing the...
How to Reface Bathroom Cabinets and Replace Doors
Whether you are remodeling your bathroom or just giving it a face lift, there are several ways to help you save money....
How to Remove an Old Recessed Mirrored Medicine Cabinet
Before installing a new recessed medicine cabinet, you need to remove the old one. Unless you take precautions, this could result in...
How to Seal Mirrors for Bathroom
Bathroom mirrors are commonly placed above vanity cabinets. Due to their constant exposure to water and moisture, it is important to seal...