How to Calculate Stair Risers

Save

A properly designed staircase begins with some basic calculations to determine the length and height of each step, as well as the overall area needed for the stairs. The first of these critical preliminary measurements is the step height, commonly referred to as the "riser" height. Determining the necessary stair riser height also determines the number of threads and the overall length, known as the "run," of the staircase. The correct calculation of the risers will insure a well-built, comfortable staircase for your home.

Things You'll Need

  • Tape measure
  • Plumb bob (optional)
  • Calculator
  • Measure the vertical distance, in inches, between the first floor and the second floor surfaces at the proposed stair location. You can use a plumb bob to make certain the measurement is accurately vertical.

  • Convert any fraction of an inch in the measurement to a decimal by dividing the bottom number, the denominator, into the top number, the numerator. For example, if the floor-to-floor measurement is 109 5/8 inches, the fraction is 5/8 inch. Divide 8 into 5 for the decimal equivalent of .625, which translates the floor-to-floor measurement as 109.625 inches.

  • Divide the measurement determined in Steps 1 and 2 by a number that gives you an equal riser height between 7 inches and 8 inches each. For our example, the result for 109 5/8 inches is 14 risers at 7 13/16 inches each or 15 risers at 7 5/16 inches. Typically, the number of risers chosen will be influenced by the resulting stair run.

Tips & Warnings

  • The run of the stairs can be determined by multiplying the tread width times the number of risers determined minus one riser.
  • National and local building codes typically specify the limits for residential riser heights between 7 inches and 8 inches. Consult your local building department to verify the code requirements for your area.

Related Searches

  • Photo Credit house construction interior 1 image by Paul Moore from Fotolia.com
Promoted By Zergnet

Comments

Resources

You May Also Like

  • DIY Stairs Calculator

    Stair design and layout requires accurate horizontal and vertical measurements. When laying out stairs, be aware of building code concerns, the existing...

  • How to Measure And Build Stairs

    Let's learn how to make a precise and beautiful stairway. Building stairs seems challenging, but it's really quite simple if you use...

  • How to Calculate Risers on Spiral Stairs

    Calculating riser height for spiral stairs is no different from any other stairway. Building code enforcement inspectors are particularly strict regarding stair...

  • How to Calculate Stair Height & Depth

    Calculating stair height and depth follows two simple rules: tread plus riser should be between 17 and 17.5 inches, or tread times...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!