How to Fix Shelves to Plasterboard


There are several systems for attaching shelving to a wall, and they all require screws. Since plasterboard doesn't hold screws, you have two choices: screw into the studs in the wall behind the plasterboard or install wall anchors in the plasterboard and screw into those. If you use wall anchors, remember that cone-shaped expansion anchors are not rated for much weight and can slip out, especially if there is lateral pressure on them. You're better off to use threaded or winged anchors, toggle bolts or molly bolts.

Things You'll Need

  • Stud finder
  • Shelving hangers or tracks and brackets
  • Level
  • Drill
  • #2 Phillips bit
  • 1 3/4-inch screws
  • Shelving
  • 1/2-inch screws
  • Wall anchors
  • Assortment of drill bits

Screwing into the Studs

  • Find the studs in the wall either by tapping or using a stud finder. Draw light marks that are easily erasable along each stud to be used for hanging the shelves.

  • Use either tracks and brackets or shelf hangers to support the shelves. Tracks are long, notched metal bars that you screw to the wall. They are designed to accept metal brackets to support the shelves. Hangers, on the other hand, are L-shaped and screw directly into the wall. These have screw holes on both sides of the 'L' so that you can screw the shelves to them.

  • Set one of the top shelving hangers or the top end of a track in position and drive a 1 3/4-inch screw through one of the holes into the wall and into the stud. Plumb the hanger or track with a level, then drive a second screw through another hole. If you are using a track, continue driving screws down its entire length.

  • Set a hanger or track in front of another stud, then use a level to make sure it is at the same height as the one you just installed. Screw it in in the same way. Continue adding hangers or tracks as needed to accommodate the length of the shelving.

  • Install hangers for another shelf 12 to 16 inches below the row you just installed. Screw them in as you did the first row, using a level to make sure they are at the same height. Continue adding rows of hangers in this way to accommodate the number of shelves you need. You can skip this step if you are using tracks since they already extend to the bottom shelf.

  • Set the shelves on the hangers and secure them with 1/2-inch screws from underneath. If you used tracks, hook the shelf brackets into the notches of the track and set the shelving on the brackets.

Using Wall Anchors

  • Mark the position of the first hole you need to attach the top hanger or the first track. Drill a hole through the plasterboard that will accommodate the type of anchor you are using. If you use winged anchors or toggle or molly bolts, this hole must be large enough to push the anchor through it. If you use threaded anchors, this hole should be slightly smaller in diameter than the threads of the anchor. For toggle or molly bolts, unscrew the set-screw from the metal sleeve and size the hole so that the sleeve fits tightly in the wall.

  • Screw the hanger or track to the wall with one screw only, without fully tightening the screw. Then pivot the hanger or track on this screw and use a level to plumb it. When it is plumb, mark the positions of the rest of the holes. Unscrew the screw, remove the hanger or track, drill holes through the marks, then install anchors or bolt-sleeves in the holes.

  • Reattach the hanger or track to the wall, screwing into all the anchors or bolt-sleeves and fully tightening the screws.

  • Install all other hangers or tracks you need in the same way, using a level to make sure each is at the same height as the ones already installed.

Tips & Warnings

  • Even the strongest molly bolts are only rated for 50 pounds, so if you plan to store heavy items on the shelves, screw the hangers or brackets into the wall studs.
  • Winged anchors and toggle bolts are difficult to remove once they are installed. Be careful when placing these, and don't use them if the shelving is temporary.

Related Searches


  • Photo Credit plush toy image by Marek Kosmal from
Promoted By Zergnet


You May Also Like

  • How to Use Screws in Drywall

    Although drywall installation is not difficult, careful attention must be paid to the installation of drywall screws. Improperly installed screws can cause...

  • How to Install a Plasterboard Ceiling

    Plasterboard, also known as sheetrock or drywall, is a pressed-chalk material used to give walls a straighter, smoother surface than plaster alone...

  • How to Fix a Floating Shelf

    A floating shelf is secured to a cleat that is attached to a wall in your home. The cleat is the bracing...

  • How to Replace Wire Refrigerator Shelves

    Refrigerators usually have glass or wire shelves for food organization. The wire shelves can become rusty or moldy, requiring replacement. Replacing wire...

  • How to Attach Heavy Shelves to Walls

    "Heavy" wall shelves can mean one of two things: the shelves themselves are heavy or you intend to store heavy objects on...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!