How to Stop Laminate Floor From Moving When Installing

Save

Laminate flooring is a popular choices in today’s homes, used both in new construction and in remodeling an older home. Because it is hard to dent and scratch, laminate is a perfect choice for those with children or pets that might damage carpeting or hardwood. While laminate floors are touted as a do-it-yourself project because of the simplified instructions, many homeowners may struggle to install a laminate floor. A typical problem is the slippery texture of the laminate planks when installed on the required underlayment. A standard procedure used by professionals stops the laminate from moving during installation.

Things You'll Need

  • Flooring spacers
  • Install the first three rows of laminate according to the manufacturer’s directions, taking care to maintain the expansion gap on the beginning wall as well as the side edges.

  • Insert laminate flooring spacers 3 feet apart along the expansion joints on the beginning wall and one spacer in the expansion joint at the end of each plank on the side walls, placing the 1/4-inch edge of the spacer pointing down unless the manufacturer recommends otherwise.

  • Place unopened cartons of flooring on the three-row area that has been installed, leaving a 3-foot space in which to kneel while installing the next rows. The weight of the cartons will stop the installed portion of the floor from shifting forward away from the beginning wall.

  • Shift the cartons of laminate flooring as necessary to continue installing the laminate. Because the rows of laminate floor interlock, the weight on the beginning rows will hold the floor in place throughout the installation process.

References

  • Photo Credit Floor image by Einar Bog from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!