How to Cut a Hole in Cinder Block Walls

Save

If you want to install a door or window in a wall made of cinder blocks, you will need to cut a hole through the wall first. Cutting a hole through a cinder block wall is a messy and time consuming project, and it requires safety equipment such as ear plugs, a respirator and eye protection. You should allow at least a weekend for this project.

Things You'll Need

  • Straight edge
  • Chalk
  • Carpenter's level
  • Drill with 5/8-inch masonry bit
  • Sledgehammer
  • Protective goggles
  • Respirator mask
  • Ear plugs
  • Work gloves
  • Masonry saw
  • Obtain a building permit from your local building authority. If you do not obtain the necessary permit, a building inspector may impose fines or force you to suspend work. When applying for a permit, it is a good idea to have an inspector verify that you are not cutting through a load-bearing wall.

  • Draw the outline of your opening with a straight edge and a piece of chalk. Use a carpenter's level to make sure all lines are level. Repeat this process on the other side of the wall, making sure the outline lines up on both sides. You can ensure that they line up by measuring from a fixed point, such as the floor or a corner.

  • Put on safety goggles, gloves and a respirator mask, and put in earplugs. Drill a hole at each corner of the opening outline with a 5/8-inch masonry bit. Repeat the process on the other side of the wall.

  • Choose which side you will start with, and punch a hole in the other side with a sledgehammer, which will help draw concrete dust away from you as you cut through the wall.

  • Insert the masonry saw blade in one of the holes, and cut along the line. Cut through the remaining lines until you have created the opening. Move to the other side and cut along the lines.

Tips & Warnings

  • You may need to brace the opening with an angle iron before framing a door or window. Bracing can help prevent the wall from cracking.
  • Do not attempt this task unless you have significant building knowledge and experience. This is a difficult project that should not be attempted by beginners. Improper placement of the opening can weaken a cinder block wall and cause the structure to collapse.

References

  • Photo Credit concrete block background image by pcphotos from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • About Concrete Block Walls

    Concrete block walls are everywhere, and they are used for everything from building homes and buildings to surrounding or marking off landscaping....

  • Cinder Block Wall Problems

    Cinder blocks, also commonly called cement blocks, are traditionally used to construct building foundations and walls. The rectangular, rough finish blocks with...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!