How to Mount a TV Inside of a Wall

Save

If you own a television, such as an LCD or plasma flat screen, it is typically mounted on a wall with a bracket or mounted on a TV stand. Another option you may want to consider is mounting the TV inside of a wall. This is the process of creating a hole in an existing wall to recess the TV. You can mount a TV inside a wall by first measuring and cutting out an opening in the wall that you want to use.

Things You'll Need

  • Poster board or cardboard
  • Pencil
  • Straight edge
  • 2x4 boards
  • Circular saw
  • Hammer
  • Nails
  • Nail Gun
  • Drywall
  • Drywall screws
  • Find the height of the wall by using a tape measure.

  • Connect pieces of poster board or cardboard together with masking tape to the height of the wall you measured in step 1.

  • Determine how high from the ground you want the television and make a mark on the poster board or cardboard with the pencil. Place a straight edge over the mark and make a line for the bottom of the frame.

  • Draw a diagram for the TV mounting frame using the line you drew in step 2 as the starting point. Measure the poster board or cardboard for the width and height of the TV. Add 3 inches to each measurement and create a box shape. Cut out the box shape from the template with a pair of scissors.

  • Place the template on the wall and secure it with masking tape. Draw an outline on the wall by tracing around the box cutout with the pencil.

  • Locate the studs in the wall with the stud finder. Mark the locations of the studs with the pencil.

  • Cut around the outline you drew on the wall in step 5 with a drywall saw or reciprocating saw. Remove the section of drywall to expose the studs. Cut the studs with the reciprocating saw so they are flush with the edges of the drywall

  • Measure the width and height of the opening with the tape measure and transfer the measurement to four 2x4 boards. Cut the boards to the required length with a circular saw.

  • Construct a box frame, for the hole in the wall by connecting the 2x4 pieces of lumber together. Set the boards on the floor or ground in the shape of the hole. Secure the frame together with nails using the hammer or a nail gun.

  • Set the frame into the hole in the wall. Secure the frame to the existing studs with nails.

  • Cover the wood frame and the studs on the inside of the wall with pieces of drywall. Secure the drywall with drywall screws using the power drill.

  • Set the television inside the opening. Add trim around the outside of the opening to cover the edges of the drywall and to secure the TV inside the wall.

Tips & Warnings

  • Cover the seams and screws in the drywall with drywall mud and drywall tape.
  • Install an electrical box and outlet for the power cord inside the frame. A receptacle for a cable or satellite connection can also be installed inside the frame.

References

  • Photo Credit Plasma panel image by Nikolay Okhitin from Fotolia.com
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Hide Wall Mounted TV Wires

    Mounting a flat-screen TV on the wall clears up floor space, becomes part of the décor and provides a good viewing area....

  • How to Install a Wall Mount TV Bracket

    Many people are mounting TVs to the walls these days. Flat-screen TVs are thin and look clean against a wall. There is...

  • How to Recess a Flat-Screen TV

    Flat-screens have been dominating the TV marketplace for several years now. As a result, companies and individuals are constantly coming up with...

  • How to Build a TV in the Wall

    Integrating televisions into the design of a room has become increasingly easier thanks to flat screen technology. Measuring only three to five...

  • The Best Rated TV Wall Mounts

    There are three basic types of TV wall mounts--low profile, tilting and full motion. Low-profile wall mounts are the most simple to...

  • Wall Mount Television Decorating Ideas

    Wall mounted televisions are usually the focal point of any room so they can be ugly eyesores if not properly decorated. Some...

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!