How to Remove Cornices


Removing cornices or any molding for that matter is difficult and must be done with extreme care so that you do not damage the walls or the old cornices. Old cornices can be refinished and then reinstalled if care is taken when they are removed. Care and time must be invested in this job in order for it to be done correctly.

Things You'll Need

  • Putty knife
  • Pry bar
  • Wooden block
  • Pliers
  • Scrape the adhesive from the bottom and top of the cornice with a putty knife.

  • Slide the putty knife under the molding and slowly pry the molding from the wall. Take care not to split the board or damage the wall.

  • Insert the wooden block in back of a nail once the molding is far enough from the wall. Place your pry bar between the wall and the wooden block.

  • Pry the nails out of the wall one at a time. If a nail will not come out with your pry bar you might want to consider using a pair of pliers to extract it.

Tips & Warnings

  • If you do a small amount of damage to your wall you can cover the damage with the molding you are going to install.
  • Old and faded molding can be sanded and refinished.

Related Searches


  • Photo Credit Images
Promoted By Zergnet


You May Also Like

  • How to Install Cornice Molding

    Cornice molding is often relegated to the experts because most people fear they will mess up the job. However, that need not...

  • How to Re-cover a Cornice Board

    Few things add an elegant, tailored look to a room like a cornice board. Sometimes called a box valance, a cornice is...

  • How to Repair Plaster Cornices

    Plaster cornices are mostly found in old Victorian homes that used cornices as a decorative border around the ceiling to enhance the...

  • The Best Ways to Paint Cornice

    Cornices come in several varieties---drapery cornices, interior ceiling cornices and exterior cornices. Exterior cornices are usually painted along with the exterior surface....

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!