How to Fix a Squeaky Pine Sleigh Bed


Pine sleigh beds have a graceful, curvilinear structure and an elegant natural finish, but over time the frame of a pine sleigh bed can loosen, causing the wood at the bed's joints to slip and rub together. This slipping can cause the bed to squeak whenever you move, which can be irritating and even cause you to lose sleep. A few simple steps can be taken to re-tighten the frame and secure the joints.

Things You'll Need

  • Wrench
  • Paste wax
  • Baby powder
  • Wood glue
  • Bar of soap
  • Sealant tape
  • Screwdriver
  • Wood screws
  • Drill
  • Remove the mattress and box spring.

  • Check the connections of the side rails to the headboard and footboard. Use a wrench to tighten the bolts on any connections that appear loose. Coat the inside of joints with either a thin layer of paste wax or with a sprinkling of baby powder.

  • Make sure that none of the individual parts of the headboard or footboard are coming apart. Re-glue any parts that appear loose.

  • Check the mattress slats. The bed should have at least eight slats made from boards measuring at least 1 inch thick by 6 inches wide. If the slats are smaller, replace them with the appropriate size.

  • Remove any screws from the slats (if present), then rub each screw's threads with bar soap for lubrication. Use sealant tape to wrap any screws that felt loose because the corresponding holes have been stripped. Return the screws to their original holes and tighten them with a screwdriver.

Tips & Warnings

  • If your bed slats were not originally screwed into place, drill holes into the bedrails and the ends of the slats and use screws to secure the slats.
  • Replace the slats with two whole pieces of plywood to eliminate the shifting that occurs as slats become loose.

Related Searches


Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!