Refinishing the floors in your home is a great way to add life to aging wood. This process will get rid of large slashes and holes which may be in the wood and will refresh the look of the entire room. Wooden floors can be made out of either hardwood such as oak, or softwood such as pine. If you're floors are made out of a softer wood, they can still be refinished with some care.
Things You'll Need
- Belt sander
- Palm sander
- 36-grit sandpaper
- 80-grit sandpaper
- 100-grit sandpaper
- Shop vacuum
- Wood stain
- Lint free cloths
- Paint brush
Clear all the furniture out of the room you will be working on . If you are replacing the baseboards, take them down at this point. If not, leave them on the wall.
Attach the 36-grit sand paper to the belt sander. Start in one corner and move the sander across the floor in a straight row in the direction of the wood grain.
Once you have one row done, start sanding the next row, overlapping at least one board. Repeat this process to sand the entire room.
Sand until 85 percent of the existing finish is gone. Use the palm sander with 36-grit sandpaper to sand the areas you can't reach with the sander.
Switch out the 36-grit paper for the 80-grit sand paper and re-sand the room. This will help get rid of any scratches left by the initial sanding and will smooth out the floor. Sand in the same direction that you used in the first sanding.
Switch out the sandpaper on the belt sander for the 100-grit paper and sand the floor one more time. This increases the smoothness of the floor.
Attach 100-grit sand paper to the buffer. Move the buffer in a back and forth motion until the entire room has been buffed.
Let the dust settle for at least an hour. Thoroughly vacuum up any saw dust which has settled on the floor.
Paint the stain on the wood with a paint brush, applying in direction of the grain. Let the stain soak in for a few seconds, then wipe away any excess with a lint free rag. The goal is to let each section of wood soak up the same amount of stain so it all looks the same.
Tips & Warnings
- For an easier time with the buffing, start in the center of the room and work your way outward.
- Softwood is very fragile so it is imperative you take your time with this type of wood. It is very easy to damage.
- Make sure you don't stay in one spot too long with the sander as you can sand a hole in the wood.
How to Sand Hardwood Floors
Refinishing hardwood flooring is a daunting task that requires quite a bit of time and patience. Before you can even begin to...
How to Refinish Fir Floors
Fir floors are much softer than traditional hardwood flooring, making them a bit more difficult to sand and refinish. Like most types...
How to Sand Pine Floors
Wood floors are an investment for your home. With care, they will last a lifetime. Although pine is a soft wood, it...
How to Finish a Hemlock Floor
Hemlock is considered softwood and is in the same category as pine and fir. It has a light brown tint--almost white--and may...