How to Remove a Chair Rail

Save

A chair rail is a one- or two-piece trim that is positioned about 3 feet off the floor. This trim historically acted like a bumper to prevent chairs at a dining room table from banging into vulnerable plaster walls. Chair rails can also divide tall walls into aesthetically pleasing proportions, but sometimes it is necessary to remove them during remodeling projects.

Things You'll Need

  • Utility knife
  • Wide putty knife
  • Flat pry bar
  • Pliers, if needed
  • Cut along the edges of the chair rail between the trim piece and the wall using a utility knife. You may also need to cut between the trim piece and any other attached trim. Often caulk or filler is used to hide gaps between trim and uneven walls, and this can act like an adhesive when you want to remove the trim with minimal wall damage.

  • Slide the wide putty knife flat against the wall, starting at one end of the chair rail. Press the knife between the trim and the wall. You may need to work along the wall at first before you find a place where the knife will fit. Tip the knife toward you gently, enough to open the gap.

  • Slide the thin edge of the pry bar into the gap, using the putty knife as a shield to protect the wall. Position the two tools so that when you pry the trim toward you, the pry bar will rotate on the metal of the putty knife. Once you get the pry bar in deep enough, the trim will begin to pull away from the wall.

  • Lift the trim away from the wall evenly by moving the two tools along the wall. Some of the finish nails holding the trim in place will likely pull through the trim. You can remove these later with pliers. Continue loosening the trim until you reach the other end. Resist the urge to grab the molding with your hand and pull, as you can accidentally gouge the molding into the wall or have exposed nails ripping the wall surface. You may need a companion to hold the trim until you release the last of it.

Tips & Warnings

  • Anyone who has patched and plastered walls knows that it is hard to repair damage. The trick to removing trim is to act as if the trim and the wall are both extremely expensive, then act to protect both of them during the process.

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Install a Chair Rail

    A chair rail is one way to dress up and make a plain room look more interesting--not to mention garner a little...

  • How to Caulk a Chair Rail

    Decorative moldings such as raised panels and chair rails can add attractive architectural detail to any interior. As with any woodwork, chair...

  • How to Attach a Chair Railing With Adhesive

    Chair rails protect a wall from damage by contact with the backs of chairs. They also provide a decorative accent and can...

  • How to Remove Stair Rails

    Two types of stair rails commonly adorn a home: wall-mounted stair rails and spindle-mounted or newel post-mounted rails. Metal brackets hold the...

  • How to Remove Floor Trim

    If you're planning on replacing carpet or flooring, you'll need to replace the floor trim first. Prepare the floor trim for removal...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!