How to Make a Bull Nose on Marble Tile


Creating the perfect bullnose edge on a marble finish can be a daunting task for the uninitiated. Since marble is a natural stone, however, it can be sanded and molded into curves and shapes that ceramic or porcelain cannot. Having the knowledge to contour your marble edges into exactly the shapes you want brings you one step closer to having the perfect aesthetic for your marble-enhanced areas.

Things You'll Need

  • Marble and granite polishing kit
  • Safety glasses
  • Dust mask
  • Gloves
  • Drop cloths (old sheets can work as well)
  • Assess the area you are going to bullnose. Shaping the edge of marble tile is a dusty process, and if you are in a delicate area, such as a master bathroom or a kitchen countertop, you will want to cover areas with drop cloths in order to keep the dust to a minimum. Also, open any windows and/or doors to the area.

  • Start with the roughest pad in your kit. The point of the various pads in the polishing kit is to gradually wear down the edge of the marble until you have achieved the polished and rounded look you are going for. The roughest pad allows you to smooth out the roughest spots that might tear one of the smoother pads into shreds. Simply turn the grinder on and gently run the pad over the edge until you can see the sharp edge being softened and rounded off. You can gently tilt the edge of the pad one way or another to accentuate the level of curve, and vary the pressure accordingly, depending on if the piece of marble is hard or soft. Always start with a light touch and go from there.

  • Work your way down through the first two or three roughest pads. Usually three or four passes with each pad is enough to suffice. If you are doing individual tiles, the best way is to simply give the edge a pass with your polishing pad, set the tile aside and repeat with the next piece. When you have gone over all of your tiles with the first pad, change to the next pad and repeat the process until you have cycled through the first few pads.

  • Appraise the edging before you move onto the "finishing" pads, or the final few. These are the pads that will add polish to the edge. If you want to add a little more contour, simply give it another pass with one of the rough pads.

  • Polish the edges. The last few pads within the kit are for this purpose alone, and the level of polish you want to obtain is determined by which pad you use. The softest pads give the highest level of sheen, but if you simply want a more natural look, use the third or fourth pad, or try each until you find the look you are going for.

Tips & Warnings

  • When purchasing a polishing kit, look for a kit that includes a variable-speed grinder. This is optimal for polishing, as a high RPM grinder can sometimes polish "too fast," which can lead to mistakes being made. An adjustable-speed grinder will allow you to use the number 2 or 3 setting and will have a lower RPM, which allows you greater control over the area you are bullnosing. Kits can be purchased at either Home Depot, Lowes or your local hardware store. Additionally, hand-held polishing kits are available for smaller areas.
  • Always wear protective gear when working with machinery.
Promoted By Zergnet



You May Also Like

  • How to Bullnose Granite

    Granite is a durable natural stone countertop material and its durability derives from the quartz and other crystalline structures that form it....

  • How to Polish the Edge of Marble Tiles

    Marble tiles have a natural beauty that can enhance any area of the home. ... How to Bullnose Marble Tile With a...

  • Alternatives for Bullnose Tile

    If you're using antique or hard-to-find tiles that don't have bullnose versions ... marble thresholds commonly provided the natural transition between a...

  • How to Make a Bullnose Edge on Travertine

    Travertine is a stone with a marble-type look that comes in a variety of shades of brown, gray and beige. It is...

  • How to Bullnose Porcelain Tile

    Porcelain tiles have a color through clay body, which means that the color, design and veining go through the tile, like natural...

  • What Is Bullnose Tile?

    If you walk into a tile shop or a home improvement warehouse, you'll see thousands of tiles in every shape, color and...

  • How to Make a Bullnose Edge on Porcelain Tile

    Adding a bullnose edge to porcelain tile means adding a smooth and rounded edge to the tile. This causes the tile to...

Related Searches

Read Article

Make an Ikea Lack Table Look Expensive With This Cheap Hack

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!