How to Fit a Fireplace Screen


Using a fireplace screen protects your house from flying sparks, runaway logs and keeps children away from the blaze. Fitting a fireplace screen, however, can be tricky. No two fireplaces have exactly the same measurements. Happily, fireplace screens come in a range of shapes and sizes. For the hard to fit fireplace consider a folding fireplace screen which can be adjusted to fit the fireplace. As a general rule fireplace screens that fit on the outside of your fireplace should have a half inch overlap with the bricks and be taller than the fireplace opening. For screens with an inside fit, the screen's edges are inside the fireplace, wrapping around the fire and are also as tall as the fireplace opening. You can purchase fireplace screens and accessories at most home and building supply stores.

Things You'll Need

  • Measuring tape
  • Fireplace screen
  • Measure the width of your fireplace by measuring across the fireplace opening from edge to edge. The average fireplace width is 36 to 42 inches.

  • Measure the height of your fireplace by measuring from the hearth to the top of the opening. The average fireplace height ranges from 28 to 32 inches.

  • Measure the depth of your fireplace by measuring from the front of the hearth to the back of the firebox. Most fireplace screens need a minimum of 6 inches from the firebox.

  • Measure the fireplace screen. For screens that bow, measure from left to right edge rather than the entire width.

  • Know the different styles of screens, there are only three categories. The Flat Panel fireplace screen is designed to lean against the fireplace opening and must be a half inch wider and taller than the opening. Curved or Bow Front screens are curved with the edges designed to rest inside the fireplace opening, "wrapping" around the fire. Leave a quarter or half inch gap between the sides of the screen and the fireplace wall. Curved screens have an open top that should be as tall as your fireplace opening. Three and four panel screens have adjustable folding panels; the screen should be a half inch taller and wider than your fireplace screen. All of these screens should either rest on the floor or have a gap less than an inch between the bottom of the screen and the floor.

Related Searches

Promoted By Zergnet



You May Also Like

  • Types of Fireplace Facades

    Fireplace facades are the focal point of a room. Fireplaces are one of the most sought-after features in a home. The type...

  • How to Install a Fireplace Insert

    If you want to salvage an old fireplace, consider installing a fireplace insert. The fireplace itself is a ready made hole making...

  • How to Replace a Fireplace Screen

    A fireplace screen is a staple on almost any fireplace today. The mesh panels serve multiple purposes, from keeping children and pets...

  • How to Measure Fireplace Doors

    The fireplace is often the centerpiece of a room. It has a tendency to dominate the eye whether there is a fire...

  • Hotels Near Sandbanks, Ontario

    Just 2 1/2 hours from the glass and steel skyscrapers of Toronto is the peaceful retreat of Sandbanks Provincial Park, set along...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!