How to Build a Freestanding Privacy Fence

Save

A warm summer evening, a pitcher of sangria, a little soft music--and the neighbor's kids watching you through the fence. Think of all the times and all the places you've been when you wished you could have just a little privacy, not a soundproof room but a little "alone" space. It would be great to have a portable, free-standing privacy fence that you can throw up at a moment's notice to give you a little protection from prying eyes.

Things You'll Need

  • 1-by-1 inch lumber or lath Brass wood screws, 2 1/2 inches 6 or 8 hinges, depending on the plan Saw Measuring tape Wood glue Screwdriver or electric drill Paint or stain
  • Decide how much privacy you need, and draw a picture of the ideal fence. Consider building your privacy fence in panels that you can join together with hinges, unfold easily and store flat. Three or four panels 2 by 4 feet each will be just right.

  • To build one panel, cut pieces of 1 by 1 inches, 4 feet in length, to make 24 4-foot pieces. Lay them on a flat surface, side by side so that their long edges touch and they make a "panel" approximately 24 inches wide.

  • Measure the exact width of your 1-by-1 "panel." Mark and cut two pieces of 1 by 1 to extend the entire width of the 24-piece panel (it should be approximately 2 feet wide). Run a bead of wood glue on the flat side of one 2-foot piece. Gently lay it across the bottom of the "panel," taking care not to disturb the 24 pieces. Repeat the process with the second 2-foot length of 1 by 1, and lay it across the top of the "panel." Let the glue dry.

  • When the glue has dried, turn the panel over and repeat the process with two more 2-foot lengths of 1 by 1, gluing one to the top and one to the bottom edges of your panel. You may choose to add a 2-foot piece to both sides across the center of your panel for added strength.

  • Use an electric drill or screwdriver to drive a wood screw through all three layers of 1 by 1 at the top and bottom of each long piece in your panel.

  • Build two or three more panels, according to your plans. Stand the panels side by side against a wall or other flat surface and decide how to attach your hinges; you must install them so that the panels will fold into one neat stack, so pay attention to the direction each hinge opens and closes. Attach one edge of a hinge at the top and at the bottom of two panels where three layers come together. Reverse the hinges for the next two panels.

  • Paint or stain your freestanding privacy fence, or use wood preservative to prevent it from warping.

Related Searches

  • Photo Credit Target.com
Promoted By Zergnet

Comments

You May Also Like

  • Outdoor Fencing for Cats

    A fence to keep pet cats in the backyard may sound unrealistic, given a cat's ability to jump over and climb almost...

  • How to Make a Portable Fence

    Portable fences come in several styles and types that are moldable and movable. Moldable fences help property owners circumnavigate natural and man-made...

  • How to Build an Outdoor Privacy Panel

    Perhaps you enjoy relaxing on your patio or terrace but are not so fond of the neighbors watching your every move. Urban...

  • Free-Standing Patio Fence Ideas

    You don't have to put up a permanent fence to provide privacy or shade on your patio. A free-standing patio fence can...

  • Bamboo Fencing Ideas

    Bamboo is a woody, fast-growing grass that sprouts into long, straight poles. It is a cheap and durable material used extensively in...

  • Temporary Fence Ideas

    Temporary fences typically have lightweight designs and often feature multiple pieces or sections, which you can put together to form a variety...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!