How to Make a Built-In Bed
When you are caught with an extremely small space to use for a bedroom, try making a built-in bed. If you are handy with wood projects, you can take this project on with little problem. Learn the basic steps to build a space-saving bed. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Find a space that provides a wall on three sides. Measure the area, locate the studs and mark them at the height where you want to place your frame.
-
2
Install a 2-by-4 inch board, cut to size, at both ends and the enclosed side. Make sure the side piece remains long enough to go from wall to wall. The head and foot piece should go up to the side piece.
-
-
3
Place the 4 inch side up against the wall, meeting the mark to keep even. Check with a level.
-
4
Use wood screws to attach the 2-by-4 inch board to the wall at the stud site. When you have attached all three sides to the wall, you have a strong foundation.
-
5
Cut a 2-by-4 inch board for the fourth side and use the screws to attach it to the ends of the bed.
-
6
Attach the correct size bed frame inside the wood. Be sure it is level and lined up correctly, because there is little chance for change once you get the bed built.
-
1
Tips & Warnings
A built-in bed is a great place to build under-bed storage drawers. You already have a sturdy area and the drawers will give a good final addition.
This type of bed is a great opportunity for specialized decorating. You can use colorful paint, a canopy, throw pillows and even stuffed animals to bring it to life.
