home sectionhome sectionConstant exposure to heat and moisture can trigger warping in doors. This exposure causes doors to bend out of shape or appear distorted, and a warped door can ruin the appearance of your exterior. Some fiberglass doors have wood grains molded into the construction, which makes these doors susceptible to warping. It's usually costly to replace a door, but you can alleviate this expense by properly caring for your fiberglass door.
Fiberglass doors are an affordable, durable alternative to wood doors. When finishing them you can paint them or you can even stain them so they look like wood. This gives them a natural appearance and allows you to choose from a variety of wood-colored stains to complete your look. Even though fibreglass is durable, it’s important to use the proper chemicals and tools since some chemicals will eat through the synthetic surface, damaging your door.
High-quality fiberglass doors offer the beauty of natural wood without any of its problems, such as cracking, rotting or warping. Available in a wide range of styles, paints and stains, fiberglass can be repainted or stained by do-it-yourselfers in a method similar to painting natural wood. Good surface preparation is the key to any successful paint job, and this applies to fiberglass doors.
Pella makes entry doors in wood, fiberglass and steel. The fiberglass line of entry doors can be purchased as-is, or with a factory finish in either paint or stain. These factory-finished doors can be further finished with a coat of polyurethane. Although the door will already be stained, you can customize your door by adding a glossy, matte or satin finish with a polyurethane topcoat. While the polyurethane will change the overall look of the door, it will also add an extra layer of protection.
The right paint helps ensure a good finish to a fiberglass door. Unlike a wood door, fiberglass does not absorb paint or stain. Unlike a metal door, fiberglass does not require a primer. It does, however, require a special preparation to ensure the project turns out as desired. When selecting paint, use a high quality, oil-based urethane paint. Urethane will stick to almost any surface and may be preferred for this reason.
Removing nails, doorknobs, latches and other items from fiberglass doors leaves holes and possibly scratches. The holes are unattractive and can become a gateway for insects and moisture. Patching compound and materials used to fill holes in wood doors do not work for fiberglass doors. Filling holes in fiberglass doors requires a filler that is made for fiberglass components. Once the holes are filled, you may stain or paint the doors.
Fiberglass doors are strong and long-lasting, exactly what you want in an item with the important job of keeping you and your family safe. Unfortunately, because the sole focus is usually on its function, fiberglass doors rarely overwhelm visitors with their beauty. Additionally, fiberglass doors often have a modern appearance that may stand out painfully in a rustic or historic home. To transform your fiberglass doors easily, use paint to create an antique faux finish.
Peep holes add a security benefit and convenience to your entry doors. The peep hole allows you to see who is at your door before opening it to strangers. The glass on the outer peep hole can develop scratches and become cloudy over time due to being in the weather. When this happens, the peep hole is not of much use and requires replacement. Replacing a peep hole is as simple as screwing a bolt into a nut.
A peep hole is the best way to see through a front door without opening it. A dirty peep-hole blocks your view, and might be detrimental to your safety. Keeping a peep hole clean aids in keeping your home safe and secure.
A good-looking garage door can enhance the look of an entire home. Keeping a garage door looking its best, however, is not always easy. This is because most doors are constantly exposed to the elements, which inevitably take their toll. Garage doors are also prone to dents and scrapes caused by distracted drivers. Whatever the case, you can improve the look of your garage door with a fresh coat of paint.
Tru Tech offers tools and testing equipment for people working as home inspectors, energy auditors, and heating, ventilation and air conditioning and refrigeration (HVAC/R) technicians. It is a place technicians can go for quality tools to help complete the numerous tasks they perform. Whether you need a hand-held device, an in-home monitor or a specialized unit, Tru Tech offers a huge selection.
Over time, rough weather and other conditions can wear your garage and cause it to look old. If you want to make over your plain garage door, paint it. This will make your garage door good as new, and you'll be able to customize it to the color you'd like. As long as you know the correct tools and painting techniques, the task is simple.
A fiberglass door can not compete with the beauty and uniqueness of wood unless it has been painted to imitate the appearance of wood. You can stain a fiberglass door so that it appears to be a wood door. A few supplies from a hardware store or a home and garden shop will be needed, as will some tools most do-it-yourself project lovers already have on hand. The fiberglass door does not need to be removed from its frame for this work.
Benchmark fiberglass doors are manufactured and sold by Therma-Tru, and come in a variety of colors and styles all their own. Of course, if you have a Benchmark door and don't particularly like the color or style, you always have the option of painting it. Because painting fiberglass is slightly different from painting wood --- both in method and in the types of paint you must use --- you will need to be careful during the preparation and painting process to make sure you do it correctly.
Whether you are installing a new fiberglass shower surround or need to mount shelves or caddies on the shower walls, you likely need to drill into the fiberglass walls. Fiberglass, a dense material, can be difficult to drill into without leaving messy, fractured holes. With the proper tools and techniques, however, you can drill perfect holes where you need them without the help of a professional.
Fiberglass doors offer heightened durability and insulation compared to traditional wooden doors. Fiberglass requires specific gel-type stains because their pores do not absorb other types of wood stains. Many fiberglass door manufacturers stain the doors in the factory so that they arrive at the home improvement store or your doorstep ready to install. You can darken light stains with additional layers of stain. However, if you are not satisfied with the darkness of the original stain and want to lighten it, you must remove the old stain completely and begin anew.
Entry doors are made from a variety of materials, from steel to fiberglass. Many doors are made from wood, but with energy efficiency being a concern for many homeowners, the insulation value is a key consideration during purchase.
Your home is filled with many different types of materials. Each of these materials needs slightly different cleaning and maintenance techniques to keep it looking its best all year long, as well as functioning properly for you and your family. Entry doors in your home, for example, might be made of fiberglass. Fiberglass doors are not maintenance-free, as some homeowners might think. Periodic and yearly maintenance is necessary for this particular type of door.
Sliding doors, made with a variety of materials, are unique in that they allow a home to have a large window to the world, while providing the additional use as an entryway to a patio or backyard.
In addition to wood and steel, fiberglass is one material to consider for entry or other doors. Popularity of fiberglass doors has increased as manufacturers have improved their quality and appearance. Fiberglass doors are made of fiberglass and filled with polyurethane insulation. They are particularly beneficial for homeowners who live in regions with extreme temperatures or high humidity.
Due to its light weight and ease to work with, fiberglass is a popular choice of material for all types of doors. While fiberglass has its plusses, it also comes with negatives, such as difficulty with paint removal. Conventional paint removal methods typically work on fiberglass, but they can also hurt the structural integrity of the fiberglass when used improperly. With the right materials and proper technique, paint can easily be removed from almost any fiberglass door.
Dummy strap hinges are often attached to doors in order to give them a more rustic appearance. These hinges are non-functional and provide decoration only. Attaching dummy strap hinges to a fiberglass door is an easy way to provide your home with an additional level of charm.
Fiberglass doors are an appealing choice in modern building because of their durability and attractive appearance. Some fiberglass doors do an excellent job of resembling wood, but won't warp and shift as they absorb moisture over time. However, even the most modern, high-end fiberglass doors aren't entirely maintenance free.
Wooden doors often dress up a home, but quickly experience the ravages of weather. When wooden doors get old and need to be changed, look to a fiberglass door for its long life. Unlike a wooden door, which is more forgiving and easily cut to fit the space, a fiberglass door requires careful, specific measurements before cutting. An exterior door needs to snugly fit its frame to keep out the elements, so measurements must be precise.
When choosing a door for your home, you have three choices: wood, steel or fiberglass. While choosing one demands some consideration and time, telling the difference between the three is fairly straightforward. Steel doors are made of steel, and a simple knock on the surface will tell you the door is metal. Fiberglass doors have texture similar to wood; however, the wood door has some characteristics that distinguish it from fiberglass and these have to do with the construction of the door itself.
Fiberglass is a composite material made of glass particles held together with resin. It is strong and resistant to almost all types of corrosion and decay. For this reason, you might decide to install fiberglass entry doors. These doors will last a long time and resist many of the problems that other exterior doors encounter like warping and rotting. You can even change the color of your doors, using special fiberglass stain in the color of your choice.
While fiberglass seems ubiquitous today, it may be surprising to learn that it was actually invented by the ancient Egyptians and the Pheonicians. These ancient civilizations made glass into fibers. It was in the 1950s Dale Kleist, a Corning Glass engineer, came up with the method--by accident--that is used today to produce fiberglass products. While these doors are durable, you may find that they may need to be repainted. Fortunately, this is something you can do in an afternoon.
Fiberglass is gaining in popularity as an exterior doorway choice. The benefits of fiberglass are that you get the best insulation performance and you can get the door in any style you want. You can also easily change the color of your fiberglass door to any other color you want using a special fiberglass stain. Fiberglass stain can be found in a wide array of hues in home improvement and hardware stores that carry paints other than house paint.
Feather River Doors is a division of Trinity Glass International, and manufactures both interior and exterior doors for the home. Their doors are made of a fiberglass composite material that is resistant to denting, chipping and rotting. Although the doors are made of fiberglass, the surface is designed to look like natural wood, and some models even have a slightly raised surface. You can stain the doors a variety of colors to match any decor.
Hardwood doors produce a first impression of style and elegance to those entering your home, but hardwood can be difficult to work with. The heavy doors can be difficult to install, hard to maintain and difficult to repaint or restain. Fiberglass, on the other hand, can be stained to look just like wood, providing elegance without the hassle. Proper cleaning, preparing and painting or staining can leave your fiberglass looking as good as or better than the wood alternatives.
A gel stain is used on fiberglass doors because it is the only type of stain that will hold onto the slick surface. Gel stains come in many varieties. One common type is oil-based gel stain. This stain may be sold as a kit with the gel stain and top coat together. The top coat is applied over the gel stain to protect the finish. It is a clear compound that provides a sheeny surface that is easy to clean. Painting a door with a gel coat requires the use of both the stain and top coat.
Traditional entry doors are made of wood or steel. Another alternative is fiberglass entry doors. Some benefits of these entry doors include appearance, energy efficiency and ease of maintenance.
Therma-Tru fiberglass Classic-Craft and Fiber-Classic doors come from the factory coated with a special primer. To create a stain wood appearance, use the Therma-Tru stain over the primed surface. The company offers a range of pre-mixed stain colors, which you can inter-mix to create a custom stain. It also sells a stain kit which includes everything you need for both the interior and exterior of the door, including stain, applicators, clear protective finish and mineral spirits for cleaning up. Purchase the stain and stain kits online through Therma-Tru or at a Therma-Tru dealer.
Fiberglass doors don't warp, rot or rust and are fairly common in newer houses. Typically used as main-entry and other exterior doors, they usually come primed and ready to paint. The best paint to use depends on several factors: the manufacturer's recommendation, the condition of the door and the look you're trying to achieve. Some fiberglass doors can even be stained and varnished to look like wood.
While doors are traditionally made from materials like wood or metal, fiberglass offers a usually inexpensive and lightweight alternative that can be molded in shapes to fit any architectural need. Doors made from fiberglass are almost always painted before their installation, and while the original paint may suffice for most design conditions, a change in surrounding wall color or pattern may require the need for a new door color. Repainting fiberglass doors is only slightly more involved than painting wood, and can be successfully completed in a straightforward process.
Fiberglass is a commonly used material for doors as it is usually affordable, lightweight and you can shape it to fit just about any style or design. Unlike wood, fiberglass rarely bares a desirable surface, which is why fiberglass doors are most commonly finished using paint as part of the manufacturing process. Most modern paints can withstand natural weather elements, but after extended periods of time exposed to direct sunlight, even the strongest paints and finishes may succumb and deteriorate. Removing the finish from an exterior fiberglass door is generally a straightforward task that you can accomplish with basic tools.
Fiberglass is a wonderful material. It doesn’t break easily and lasts a long time. If your door is too big or long, it is reasonably easy to cut to the dimensions you need. Cutting fiberglass is a simple procedure, but in handling the door, you may need help because some are heavy. Fiberglass is also environmentally-friendly and reduces the number of trees cut to make a wooden door.
If the factory-applied stain on your fiberglass doors doesn't match your decor, or if the manufacturer did a spotty job, you can fix the problem yourself. Fixing fiberglass stain is difficult because you cannot sand fiberglass doors to remove the stain. Instead, work with chemicals designed to remove stain from the surface of fiberglass for a clean work surface where you can start fresh. Fiberglass door stain is a beautiful addition to your door, once you achieve the look and the color that you want.
Designed for use on upright surfaces, gel stain is perfect for customizing a fiberglass door. It adheres to the fiberglass surface to create a new color, and the thick consistency of gel stain means it won't run as you apply it. If you previously stained your fiberglass door but found the color to be too dark, you can lighten it by stripping the door and applying a new stain.
Fiberglass doors are very popular because of their durability and lightness compared with other door construction materials. You can decorate fiberglass doors with blinds or other accessories that require screw holes for mounting. Fiberglass is harder and stronger than wood but can just as easily be drilled into using wood drill bits. The fiberglass will dull drill bits out fast and generally require pilot holes when drilling holes any bigger than 1/8 inch.
Fiberglass is a strong and durable material but it is brittle compared to metal. Instead of denting when impacted, fiberglass will fracture or break if hit hard enough. However, when fiberglass cracks or breaks it can easily be repaired and restored to it's original strength. Fiberglass is applied in layers of fiberglass mat that's saturated with a catalyzed fiberglass resin. Small fiberglass repairs such as a door, that don't require a lot of strength, can be done with a fiberglass filler putty. All fiberglass materials can be found at your local auto parts supplier or a marine supply store.
Doors are commonly constructed with fiberglass, which is a lightweight and durable material. Fiberglass is non-corrosive, which means it will not rust and it's also easier to drill or cut than metal. A popular addition to a fiberglass door is a curtain. The curtain rods will have to be mounted to the door with screws, which requires pilot holes to be drilled in order for the screws to go into the fiberglass. This is a relatively easy project that can be done with common household tools. If you have to purchase the tools for this job you can find them…
Fiberglass doors take and hold paint well, therefore, if you would like something more interesting than a standard painted door, you can add character by antiquing your fiberglass door with layers of paint. Don't be afraid to experiment a bit. Because it's paint, if you don't like the result, all you have to do is re-paint it. Add an antique-style lock-set, and you'll have a wholly new and pleasing look.
Fiberglass doors are stylish and highly durable. Making a perfect addition to any home decor, the doors can create a modern elegance for a fair price. Cleaning the fiberglass doors is an easy task, requiring just a few simple household ingredients. By using ingredients you have on hand in the home, each cleaning will cost just a few cents. When compared to the high price of retail cleaning products, a homemade solution is by far the best cleaning option.
Fiberglass doors are made from finely woven glass fibers mixed with adhesive or resin. This mixture is then pressed to from a solid door slab, or rolled into thin sheets that are wrapped around a foam core. These doors often look similar to wood units, but are are much more durable and long-lasting. They are resistant to moisture, humidity and temperature changes, and require less maintenance than wood doors over time. Fiberglass can even be stained or painted like wood to create the desired finish.
A clean white door is often one of the first impressions of your home that a visitor receives. White fiberglass doors can be difficult to keep clean, but with some very simple techniques and some common household items, you can ensure that the first impression your home gives is a good one.
Fiberglass doors are quickly becoming a popular alternative to traditional wood entry doors. Some homeowners may find it difficult to choose between these materials, especially when these doors have so many similar characteristics. By examining the benefits and drawbacks of wood and fiberglass doors, you are more likely to choose the one that will best match your needs.
Because fiberglass cannot absorb stain like wood can, you will need to use a gel coating when you stain a fiberglass door. If you are working on an exterior door, this will work just as well as regular stain on a wood door. However, you will need to take a little extra time to make sure that the gel coat is applied correctly so it will adhere to the door properly and provide years of beauty.
Installing a peephole, or door viewer, in your fiberglass exterior door is an easy way to add an extra measure of security to your home. Fiberglass doors are actually two fiberglass panels with wood and an insulating foam core between the panels. You can drill through the fiberglass and the core to install a peephole. Some peepholes have tiny "teeth" around the viewing lenses, which are meant to be pushed into a wood door during installation. Avoid buying this type of peephole for your fiberglass door. If you already have a peephole like this, it will be necessary to break…
Fiberglass doors are very durable, but the top coat finish usually wears down after a few years. This is especially true of exterior doors, which are exposed to the elements. This can leave the door looking old and worn. Fortunately, all you usually need to do to make the door look like new again is apply a new clear-coat finish. This job is fairly easy for the average homeowner, but you will need to allow at least a few hours so you don't rush through it (much longer if you decide to repaint or re-stain the door first).
Painting a fiberglass front door requires a better quality paint than painting a wood door. Fiberglass doors do not absorb moisture like wood doors. The paint will only stick to the surface. Wood doors will absorb some paint into the surface layer. If the fiberglass door is not properly painted, the paint will easily peel off.
Doors made of fiberglass have many advantages. They will not warp, crack, split, or rot like wood. In addition, fiberglass doors provide more insulation for your home than most wood doors, which is a plus in climates that have hot and cold seasons. High quality fiberglass doors can mimic the look of wood and can be come in different styles and sizes. Just like wood doors, you can paint a fiberglass door to add your desired look to your entryway.
