Different Colors of Crackle Paint Finishes

Save

Shiny new decor may depend for character and a certain gravitas on the appearance of age and wear. A faux finishing sleight-of-hand that fools the eye is crackle glazing -- creating the crazed, cracked look of old, deteriorating paint that's about to chip and flake off. You can do it with a simple, swipe-on liquid that reacts with wet paint to produce a crazed finish. Pick your colors with care -- it takes more than one paint color to achieve the effect -- follow the directions with even more care, and try not to be smug about all the compliments.

Color Contrast

Whether the surface is wall, trim or furniture, you'll need an undercoat that peeps through the topcoat cracks when the craqueleur job is done. For best results, choose contrasting colors. A dresser painted with a base coat of lilac, crackle glazed with a topcoat of plum, becomes a plum dresser with a crazed pattern of palest purple showing through the cracks. Whitewashing over a darker color is a popular way to handle crackle glaze. The chalky white topcoat over a traditional shade like forest green or gunmetal gray gives an impression of an old, much-painted artifact from another era. Just use flat or barely glossy paint for the topcoat so the cracks break cleanly and the effect works.

Weather Vain

Time and weather are tough on exposed windowsills, chairs and tables, hutches and porch walls. When your new finishes need mellowing to blend with your vintage sensibility, crackle glaze them, entirely or in random sections, to mimic natural aging. This is your basic two-color craqueleur -- fake but fabulous weekend work. Milk paint is a fun way to go for rustic and primitive decor. The paint is opaque and goes on smoothly with good coverage. The colors are traditional, which contributes even more to an authentic time-worn look. Pick strongly contrasting base and topcoats -- Confederate gray under buttercream, or baby blue under bard red -- and let the base coat dry overnight. Apply the crackle glaze according to directions; let it dry to tacky and then lay on an even topcoat, being careful not to go over any freshly painted areas and disturb the chemical reaction. The crazing will make large, regular, prominent cracks or veins in the topcoat, letting the base coat show through. Cover a cured piece with clear varnish or polyurethane for protection.

Crazed Porcelain

Show off your faux finishing skills by refining a crackle glaze finish to look like antique china. Old porcelain develops a crazed finish under the clear top glaze that you can recreate for picture frames, decorative accessories or tabletops with a twist of basic crackling technique. Brush on the base coat, let it dry and apply the crackle glaze. When the glaze is tacky, sponge on the top color. To avoid disturbing the crackle medium and ruining your finish, load the sponge with a thin layer of paint and press it to the crackle-glazed surface -- firmly but just once. Sponging encourages a web of finer, smaller cracks in the dried finish. Once layers have cured, you can rub on a tinted antiquing glaze that will protect the work and add a time-darkened overlay to the piece. You can also use a special faux porcelain crackle glaze that is applied over the top color, allowed to dry for 24 hours, and then covered with a rubbed-on glaze or tinted glaze for aging and protection.

Wrinkled Metal

An interesting craqueleur effect looks like old stressed metal and can be used as a copper or battered tin finish on a chimney breast or kitchen wall or on furniture or porch planters. Apply a solid base coat of flat color -- two coats may be necessary for completely opaque coverage. Once the base color is dry, cover it with a coat of metallic color -- copper, verdigris, steel or any metallic finish. Let that coat cure overnight. The next day, roll on a very thin coat of crackle glaze, over the entire painted surface. When the crackle glaze is tacky, sponge on a clear, glossy, water-based polyurethane in sections, pouncing once to absorb any excess polyurethane and then moving on to the next area. The finished project looks like shiny, crazed "old" metal.

Related Searches

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!