How to Make a Bib That Looks Like a Man's Tie

Save

Give a one-of-a-kind gift to a little boy by creating a bib that resembles a tie. In addition to becoming a fashionable gift, the bib is handy for mealtimes when the little guy needs to eat. Bibs catch food that would otherwise end up on the boy's clothing and prevent a mess or stain. Creating your own design on a bib is not difficult and can be done in minimal time by using items that are lying around the house.

Things You'll Need

  • Solid colored bib
  • 12-inch by 12-inch square of fabric
  • Fabric scissors
  • Pins
  • Sewing machine
  • Measure the length of the interior of the bib and subtract half of an inch. The tie fits directly in the center of the plain bib; therefore, measureme so you do not make the bib too long or too small.

  • Open the square of fabric and draw the shape of the tie on the fabric. The length of the tie will be the measurement of the bib minus one half of an inch. The top of the tie resembles the shape of a "home plate" in baseball without the front peak. Angled outward from the sides of the "home plate" the tie will slightly flare downward to a triangle peak. The bottom of the tie will be slightly larger than the top of the tie.

  • Cut the tie shape out of the piece of fabric. Discard the extra material.

  • Pin the tie shape on the center of the front of the bib. The pins hold the fabric onto the bib as you sew around the edges.

  • Sew the shape to the bib using a sewing machine or hand stitches. Remove the pins as you move along the shape. Cut any loose threads.

Tips & Warnings

  • Cut fabric out with scalloped-edge scissors for added detail.
  • Monogram the name of the boy along the bottom or sides of the tie shape.
  • Do not sew buttons or other objects onto the bib; the child may pull them off and choke on them.

Related Searches

References

  • Photo Credit Jupiterimages/Goodshoot/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!