One of the oldest methods of rug construction is the flat wrap. This art has been used on every major continent, including Asia, Europe and America. Making flat wrap fabric rugs is an excellent way to recycle old, worn clothing into functional, attractive decorative pieces with a new life. These rugs are washable and make good mats for bathrooms or entryways. Flat wrap rag rugs are cost effective and last for years, turning old family discards into new family keepsakes.
Things You'll Need
- Fabric scraps, 14 yards
- Craft coiling, 100 feet, 1-inch
- Tape measure
- Yarn needle, large eyed
- Hot glue gun and glue
Mark every two inches along the fabric length. Make a small cut, using scissors, at each of the marks. Tear fabric, width-wise, creating 2-inch wide strips.
Lay the craft coil on a flat surface. A tabletop makes an excellent workspace.
Thread one end of a fabric strip into a large, plastic yarn needle eye. Glue the end of the fabric strip to the cord, using the hot glue gun. Start wrapping the fabric strips around the craft coil or cord, overlapping strips slightly until you reach 6 inches.
Fold the end of the wrapped cord into a tight circle, creating the rug center. Continue to spiral the craft coil around the circle for 4 inches, keeping the coil firmly together.
Bring the needle and fabric strip up from underneath the spiraled cord to the top between the coil spirals. Thread the needle and fabric strip back down through to the back side of the coil you just wrapped. Bring the needle around that coil and back up and through again to the coil top, threading the needle and fabric strip through a section of previously wrapped fabric; this creates a stitch to hold the coils together and in place.
Continue wrapping the coil with fabric strips, repeating the stitching process every 6 inches along the remaining coil, until you reach the cord's end. Add fabric strips as necessary.
Cut the coil end at an angle. Apply glue to the tapered cord end to keep it from fraying. Insert the needle and fabric strip from the back side, up between the tapered coil end and previous coiled row. Wrap tightly around the outside coil, repeatedly threading the needle up through the top side of the rug, around the outside coil, and back up between the rows, connecting the last 3 inches of the tapered end to the previous cord row. A coil of 100 feet results in an approximate 28-inch rug diameter.
Insert the needle with the remaining fabric strip horizontally into the fabric wraps on the rug's backside. Pull the needle through the wraps across the back side and cut off excess fabric tail.
Tips & Warnings
- Use wider fabric strips to create a thicker rug. Try to pick fabrics with consistent thickness to give the rug surface an even look and feel.
- Tuck any loose tail ends of fabric strips into the seams of the created rows.
- A non-slip rug mat helps the rug lie flat against the floor.
- Use the same amount of tension for wrapping all coil rows. While the cord must be wound firmly, rows fitted too tightly cause the rug to "cup" rather than lay flat.
- Photo Credit Hemera Technologies/AbleStock.com/Getty Images
How to Make Coil Baskets
Making coil baskets is an old craft that involves wrapping fabric strips around rug cording and attaching the coiled rounds with more...
How to Make a Spiral Lanyard
A lanyard is a rope or cord that when wrapped around the the neck or wrist is used to carry objects. One...
How to Make Twine Rag Rugs
You can use twine to make a coiled rug, similar to the colorful, coiled rag rugs seen in many kitchens. Because twine...
Parachute Cord Crafts
Parachute cord (or paracord) is an extremely versatile product with innumerable arts and crafts applications. It is available in many sizes and...