How to Make Aprons From Shirts

Save

Whether you're a beginning sewer or an experienced seamstress, you can look cooking-show chic while you cook. Refashioned from an old button-down shirt, this apron features coordinating pockets and a colorful waistband for a fashionable twist. Go for flair when choosing the accent fabrics.

Turn a shirt into an apron.
(Beth Huntington )
  • Large button-down shirt with a pattern you like
  • Seam ripper
  • Iron and ironing board
  • Measuring tape
  • Coordinating fabric for waistband, 3/4 yard
  • Coordinating fabric for pockets, 1/4 yard
  • Washable marking pen
  • Fabric scissors
  • Sewing pins
  • Coordinating thread
  • 90/14 medium-weight universal sewing machine needle
  • Sewing machine
Materials needed
Beth Huntington

Use a seam ripper to remove the pocket from the button-down shirt. After removing the pocket, press the area with a hot iron to close any holes in the fabric from the stitching.

The pocket needs to go.
Beth Huntington

Use the bottom portion of the shirt to make the apron. Measure 15 inches up from the bottom of the shirt using a measuring tape. Mark this distance across the shirt with a washable marking pen and cut along this line. Flip the shirt over and cut up the center back so you can lay the shirt out flat.

Flip it again, and now measure and mark 30 inches across the front of the shirt. Center the button placket when you mark. Cut the new sides.

The bottom of the shirt -- buttons included -- becomes the apron.
Beth Huntington

Fold 1/4 inch of fabric under on each side and press with a hot iron. Fold another 1/4 inch under and press again. Pin in place. Sew with a medium stitch length and a medium-weight 90/14 universal needle. Remove the pins as you sew.

Press, pin and sew the sides.
Beth Huntington

Set your sewing machine to the longest stitch length and sew 1/2 inch in from the edge all across the top raw edge of the apron.

Baste along the top raw edge.
Beth Huntington

Pull slightly on the bobbin thread of your basting stitch to gather the top of the apron. Set the apron aside.

Create the gathers by pulling on the bobbin thread.
Beth Huntington

Cut out a 12-by-60-inch piece of coordinating fabric to use for the waistband of the apron.

Cut fabric for the waistband.
Beth Huntington

Press the side edges under 1/4 inch on both sides of the waistband.

Press the side edges of the waistband under.
Beth Huntington

Fold the top and bottom of the waistband horizontally into the center and press with a hot iron.

Fold and press the waistband into the center.
Beth Huntington

Fold the waistband horizontally in half and press with a hot iron.

Fold and press the waistband in half.
Beth Huntington

Mark the center of the waistband with a washable marking pen. Tuck 1/2 inch of the gathered edge of the apron into the waistband. Match the center front button placket to the center front mark of the waistband.

Tuck the gathered section of the apron into the waistband.
Beth Huntington

Pin the gathered edge of the apron into the waistband, pinning all the way around it.

Pin the apron into the waistband.
Beth Huntington

Start to sew on one end of the waistband. Continue to sew all around the waistband, removing the pins as you sew.

Sew the waistband.
Beth Huntington

Cut out two 7-by-8-inch pieces of coordinating fabric. Press 1/4 inch under on all sides, and then press under another inch on the top of the pockets.

Cut and press the pockets.
Beth Huntington

Place the pockets evenly on each side of the apron. Pin and sew the pockets.

Pin and sew the pockets.
Beth Huntington

Tie the waistband around your waist, pour a glass of wine, turn on some music and get cooking in your fabulous new apron.

Tie the finished apron around your waist.
Beth Huntington

Related Searches

Promoted By Zergnet

Comments

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!