How to Make an Artist's Wooden Palette

Save

The artist's palette has a flat surface, most commonly made from a lightweight wood, that can be used to mix the paints and pigments the artist will use during the painting process. It is designed in such a way that the artist can easily hold it in his hand, allowing easy movement around the painting canvass. You can make your own artist's wooden palette with a few simple materials within a couple of hours and be well on your way to creating your own masterpiece.

How to Make an Artist's Wooden Palette
(Elizabeth Johnston/Demand Media)

Things You'll Need

  • Sketch pad
  • Pencil
  • Protractor
  • Clear plastic french curve
  • Scissors
  • 1/16 by 16 by 20-inch piece of balsa wood
  • X-acto knife
  • Light-grit sandpaper
  • Newspaper
  • Wood varnish
  • Paintbrush
  • Steel wool
Step 1

Take a piece of sketch pad paper, at least 12 by 16 inches in size, and use a pencil to sketch a layout of an artist's palette, like the one in the image (see the Tips section below). Use a protractor or french curve to help you sketch the pattern you want.

Elizabeth Johnston/Demand Media
Step 2

Cut the pattern out with scissors when you have it exactly the way you want it to look. Lay your paper pattern out on a piece of balsa wood and trace the outline onto the balsa wood with a pencil.

Elizabeth Johnston/Demand Media
Step 3

Trim the excess balsa wood from your outline with an X-acto knife. When you have the balsa wood cut away, lay out a thumb hole on your palette like in the image and use the X-acto knife to cut out the hole.

Elizabeth Johnston/Demand Media
Step 4

Sand the edges of the balsa wood palette with a fine-grit sandpaper to remove any rough edges. Also sand the edges inside the thumb hole.

Elizabeth Johnston/Demand Media
Step 5

Spread a newspaper over your work surface and paint a thin coat of varnish over the top of the artist's palette with a paintbrush and allow it to dry. Once it dries, turn the palette over and paint the back of the board with varnish and allow it to dry.

Elizabeth Johnston/Demand Media
Step 6

Sand the palette lightly with a steel wool pad to get rid of any burrs or standing grain and then place another layer of varnish on the front and back of the board and allow to dry.

Elizabeth Johnston/Demand Media
Step 7

Ensure that your artist's palette is completely dry and you are ready to start applying your paint materials.

Elizabeth Johnston/Demand Media

Related Searches

References

Promoted By Zergnet

Comments

Resources

Related Searches

Check It Out

12 Tiki Essentials to Turn Your Bar Cart Into a Tropical Paradise

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!