Maytag Dryer E3 Error

Save

The Maytag Epic line of dryers comes with built-in tests to help diagnose any problems with cycles, the control board, or other functions of the dryer. The "E3" error has to do with the inputs and display on the dryer.

Identification

  • Press "Up," "Down," "Up" and "Down" again on the timer controls to enter the diagnostic testing mode. The LCD lights will flash and "88" will appear briefly on the screen. If you have the "E3" error, it will pop up and remain flashing on the LCD screen.

Effects

  • The "E3" error means there are issues with button entry. This could be a mismatched entry key, no connection at all, or just a general glitch.

Prevention/Solution

  • Check the connections from the control board to the dryer. There are two connection points that are simple plug and play ports. Every model features different port locations so refer to your dryer manual for the connection location. See if they're properly inserted. Unplug the connection points and reinsert them back into the control board to reset the connection.

Considerations

  • If the connections are not the problem, then the dryer control board needs replacement. Contact Maytag customer service to find out more information about parts, installation, and warranty.

Related Searches

References

Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!