Upcycling old rubber tires is a great way to keep them out of landfills. Painted tires with bright colors and fun patterns can become vibrant lawn art, outdoor planters or the ultimate tree swing. And painting rubber tires is a lot easier than you would think.
Things You'll Need
Spray paint for outdoor use (preferably with primer)
Acrylic paint for outdoor use
Step 1: Clean the Tire
Using a rag and dishwashing soap, thoroughly wash the tire inside and out to remove dirt and grease. Be sure to work the rag into the treads of the tire. Rinse thoroughly, and let the tire dry overnight.
When the tire is dry, there may still be a little water trapped on the inside of the tire. Just wipe it away with a paper towel.
Step 2: Drill Drainage Holes
If you are planning on using the rubber tire as a swing, drill one to three holes in what will be the bottom using a large drill bit (at least 3/8-inch). The drainage holes will prevent water from accumulating in the tire so insects stay away.
Step 3: Spray Paint the Tire
In a well-ventilated space, paint the tire using spray paint that is designed for both indoor and outdoor use. Check the label to make sure it is suitable for plastic. Most spray paints available in the store are a combination paint plus primer, so you do not need to apply a primer first if your spray paint already includes it. Apply several coats until the paint has completely covered the tire. Because the tire is black, it can take a lot of coats for lighter colors to become opaque. It took two and a half cans of orange paint to cover this tire.
Prop the tire on two bricks so the tire does not sit on the ground as you spray paint. This way, the paint will not stick to any paper or plastic protection you've placed under the tire. When the top side is dry, flip the tire over and paint the other side.
Step 4: Create Stencils for Details
To add designs to painted tires, you can draw freehand, but it can also be easier if you create stencils first. Because I was creating an argyle pattern on this tire, I cut out diamond shapes on contact paper to make an adhesive-backed stencil that would stay on the tire as I painted. If you are using different colors, create a stencil for each color so the paint colors don't mix.
Step 5: Paint the Details
For the design details, use acrylic paint that is designed for outdoor use so it will withstand the elements. I actually used an outdoor acrylic paint meant to go on terra cotta pots. In fact, at my local crafts store, it is stocked by the pots rather than with the other paints. (You can also use outdoor latex paint.) Using the stencil, move the paintbrush from the outside in so paint does not leak under the stencil. And be sure to get the brush into the treads of the tire for maximum paint coverage.
Step 6: Apply Additional Coats
Paint one or two additional coats of your design to make it opaque. If you've already removed the stencils, that's fine, since you can use the first coat as your guide.
Step 7: Draw Finishing Details
To complete the argyle design, I drew diamond shapes freehand. For your own design, you might draw polka dots, hearts, smiley faces or anything you can imagine.
Step 8: Don't Forget the Tire Walls
After painting the main section of the tire where the treads are, add a design element to the walls of the tire. It can be as simple as a circle around the painted tire that mimics the tire's grooves.
Step 9: Make a Tire Swing
Once you are done, display your painted tire as a swing that hangs from a tree branch. Think safety first by using a rope that is rated for a high weight level, and make sure the branch is thick and sturdy enough to hold the weight of someone swinging from it (because you know you're going to be the first one on there!).