Making A Bear Head in Balloon Modeling

Video Transcript

"Hi everybody, Malik the magic guy with expertvillage.com. So now that I’ve showed you how to do the pinch twist I’m going to show you how to assemble a basic bear head. Now this is a very important shape because a lot of animals are based on it, the bear, the lion, the pig that I’m going to show you a little later on are all based on this basic assembly, so follow along it takes a few bubbles to do it but you’ll do fine and it’s going to use the pinch twist and a lock twist that we did before so if you haven’t watched those sections watch those sections first or you won’t understand what I’m doing. So we want to make a couple small bubbles, okay like this…then I’m going to hold these in my hand, okay so these are about an inch maybe a little more than an inch, now I’m going to make one about an inch and a half like this…I’m going to make another small one about an inch, then we’re going to make another inch and a half so it goes kind of big, small, big okay, then another small one, so we have this basic idea and then one more kind of inch and a half one like that… Then we’re going to take these two bubbles right here and lock twist them together so we now have this…or something close to that, now we’re going to take this bubble right here and tuck it through from the back. Now normally if we let that go it would unravel but what we’re going to do to hold it together is take these two small bubbles and pinch twist them here…and we’re going to pinch twist one here…and that will give us a basic teddy bear head. Now just since we’re talking about it we can put a body on this if you want, this isn’t a teddy bear body we’re going to do that later but you could you know go anywhere you want pretty much with this but that’s your basic teddy bear head and that’s going to be the basis of a lot of other things later on."