This Season
 

AT&T DSL PC Requirements

AT&T DSL PC Requirementsthumbnail
Minimum computer requirements for AT&T DSL.

If you are considering subscribing to AT&T's DSL service, there are certain minimum requirements your computer must meet. You must have a faster enough processor, enough system memory, the necessary hardware to install the software and the proper network connection options to communicate with the DSL Modem. Some of the requirements vary depending on the Windows operating system your computer runs.

Related Searches:
    1. Available Disk Space

      • Before you can install AT&T DSL on your computer, you need to have a certain amount of disk space or hard drive space available. If your computer's operating system is Windows 7 or Windows Vista, it must have at least 125MB of available hard drive space. If your computer runs Windows XP, it must have at least 100MB of available disk space. You can check the available disk space by accessing "My Computer."

      Memory (RAM)

      • Your computer needs 1GB of RAM for Windows 7, 512MB of RAM for Windows Vista users and 128MB of RAM for Windows XP. You can find out how much memory your computer has by accessing System Properties in My Computer. If your computer doesn't have enough memory, programs will not run properly and your computer may freeze up.

      CD-ROM

      • Your computer must have a functioning CD-ROM drive or you must have a external CD-ROM drive that you can plug in to a USB port on your computer. Installation is performed with a CD. If you don't have a working CD-ROM drive, you will not be able to install the software on your computer.

      Processor Speed

      • A different minimum computer processor speed is required for each version of Windows. The processor must have a speed of at least 1 GHz for Windows 7. A minimum processor speed of 800 MHz is required for Windows Vista, and a minimum processor speed of 300 MHz is required for Windows XP. You can determine how fast your computer's processor is by clicking the "System" icon in the Control Panel.

      Network Interface

      • You must have an Ethernet port available on your computer. This is needed so you can hook up your computer to the DSL modem and connect to the Internet. An Ethernet port looks like a phone jack, but is larger, according to AT&T. If you aren't sure whether your computer has an Ethernet port, hold up the end of a telephone cord to the port. You should be able to determine whether the port is too large for your phone cord to fit.

    Related Searches

    References

    Resources

    • Photo Credit DSL Modem Detail image by Rob Hill from Fotolia.com

    Read Next:

    Comments

    You May Also Like

    Follow eHow

    Related Ads