A folding coffee table is a great way to have table space when you need it while retaining the option of extra floor space by folding it away. A simple wooden coffee table is easy to construct and folding legs can allow you to stash it away--perhaps behind the couch--when you don't need it. Start with good quality wood and hardware for the sturdiest table possible.
Things You'll Need
- 3 pieces 2 by 2-inch lumber, 8 feet long
- Drill bit set
- 2 1/2-inch screws
- Phillips driver bit
- 2 by 6-foot 3/4-inch plywood
- 1 1/4-inch screws
- 4 1 1/2-inch hinges
- 1/2-inch wood screws
- 4 small sliding bolt locks
Cut the 2 by 2-inch lumber into two 5-foot-8-inch pieces, two 17-inch pieces and four 16-inch pieces with a hand or power saw. The 16-inch pieces will be the legs, so if you want a taller or shorter table, adjust their length.
Form a rectangle with the 5-foot-8-inch lengths for the top and bottom and the 17-inch pieces for the sides, with total outside dimensions of 5-foot-8 by 20 inches (2 by 2 lumber is actually 1 1/2 by 1 1/2).
Screw this rectangle together by drilling a 1/8-inch hole for each screw to avoid splitting the wood, then driving screws in with a Phillips head bit on your drill or power driver.
Lay a 2 by 6-foot piece of plywood over the top of your rectangle so there is 2 inches of overhang on each side. Screw the plywood onto the frame securely, then flip the tabletop over so your frame pieces face up.
Place one leg in each corner, inside the frame, leaving about 1/2 inch of space between the leg and the short end of the frame to allow it to swing closed easily. Using 1/2-inch wood screws, attach a hinge on the side of each leg that faces toward the center of the table's long side. All four legs should be able to fold inward without overlapping.
Fold the legs out into their open positions and align a sliding bolt lock (the metal locks often used on bathroom stall doors) along the long side of the frame so the bolt will slide into the leg when it is locked. Mark where the bolt will hit the leg, then remove the lock and drill a hole for it. Discard the loop the bolt would slide into if you were locking two surfaces on the same plane. Attach the lock to the wood using the screws that came with it. When you want to use the table, unfold the legs and slide the bolts into place to keep the legs open.
Sand any rough edges and paint the table as desired.
- Photo Credit lock image by cherie from Fotolia.com
How to Make an Inexpensive Coffee Table
If you've shopped for a coffee table lately, you're aware that the price can go off the charts. Here are some ideas...
How to Make Coffee Table Legs
Coffee tables are for making the living room look good. Usually centered with the sofa, they are decorated with books or flowers....
How to Make Folding Table Legs
A folding table is a piece of furniture that is often used to help seat extra guests that may come over for...
How to Build a Folding Leaf Dining Table
Do you and your family have frequent get-togethers or dinner parties but don't want a huge table taking up your dining room...
How to Build Shadow Box Coffee Table
It's always nice to have a piece of furniture in the house that shows off your fashion sense. One piece of furniture...
How to Make Coffee Tables
Creating your own coffee table from plywood and broken ceramics or tile is an simple building and craft project that will add...
How to Make a Folding Picnic Table
Folding picnic tables can take several forms. Among the references and resources listed for this article, you'll find a how-to video and...
How to Build Your Own Fold-Down Changing Tables
Whether you live in an apartment or your own home, saving space is an issue for many people. Finding ways to store...
How to Build a Folding Drafting Table
Drafting tables are used to create drawings of blueprints and to review large documents. Drafting tables are valuable tools for engineers and...
How to Make a Wood Coffee Table
You can make a coffee table out of any kind of wood, even an old tree stump. The kind of wood coffee...