How to Print Legal-Size Paper on a Canon Copier
Canon Inc. manufactures copiers for personal and commercial use. These copiers can run legal-size paper, which is 8 1/2-inch by 14-inch paper. If the copier has more than one paper drawer, one drawer can be loaded with legal paper and the other loaded with letter paper. If there is only one drawer, however, the letter paper is removed and legal paper added in order to run your copy job. After adding the paper to the drawer, you input the new paper size on the control panel so the copier knows it has a different size paper than normal.
Other People Are Reading
Instructions
-
-
1
Open the paper drawer to which you wish to add the legal size paper. Remove any paper that is already in the drawer, then set this extra paper aside.
-
2
Locate the paper side guides in the drawer. Move the guides to the 8 1/2 x 14 inch (or "LGL") marks either by squeezing the lock clips then moving the guides or by tilting the guide, removing it, then reinstalling it in the proper position for the legal-size paper.
-
-
3
Add the appropriate amount of legal-size paper to the drawer. Note the maximum stack height mark on one of the paper guides or on the drawer itself. Do not fill the legal-size paper higher than the maximum fill mark.
-
4
Close the drawer.
-
5
Press the "Additional Functions" button on the control panel. Select "Common Settings," then click "OK."
-
6
Press the "-" button or the "+" button to select "Select Paper Type." Press "OK."
-
7
Select the drawer in which you put the legal-size paper, then press "OK."
-
8
Press the "-" button or the "+" button to select the paper type. For legal-size paper, you probably want "Plain Paper." Press "OK."
-
9
Confirm that "Reg. Paper Size" is selected, then press "OK."
-
10
Confirm that the drawer is selected to which you added the legal-size paper, then press "OK."
-
11
Press the "-" button or the "+" button to select "LGL." Press "OK."
-
12
Press the "Stop" button to exit "Additional Features" and return to the standby mode.
-
13
Input the copy parameters on the control panel for your copy job. Select the drawer into which you added the legal-size paper. Insert the original document into the document handler, then press "Start."
-
1
