A red brick fireplace may not fit your room’s interior-design scheme, but do not fret. You can paint the brick. Be aware that painting brick is a permanent change. Choose shades from your room’s color palette. Look at fabrics, artwork and even interior-design magazines for inspiration. Using an eggshell or satin-sheen paint will make cleaning the painted brick a snap.
Things You'll Need
- Clean drop cloth
- Hard-bristle brush
- Soapy water
- Painter’s tape
- Bonding primer
- Paint tray
- Rough-nap roller
- Chip brush
- Eggshell or satin latex paint
Move all furnishings and fixtures away from the fireplace. Place a clean drop cloth on the floor. Cover any nearby accessories with painter's plastic.
Prepare the fireplace for paint by scrubbing away soot and grime. Use a hard-bristle brush and warm soapy water. Scour the fireplace until all the dirt has been removed. Allow the fireplace to dry for about 24 hours.
Stick painter’s tape on all adjacent walls and areas such as door frames, window frames and fireplace mantle. Ensure that the tape is stuck well to the surface so primer and paint will not seep underneath.
Pour a masonite bonding primer into a paint tray. Using a rough-nap roller, slowly roll the primer onto the brick surface. If the roller cannot fill in any areas, such as the grout lines, use a chip brush to paint in these sections. Wait two to four hours, and then add a second coat. Allow the primer to dry four to six hours, and clean the roller.
Paint the entire brick fireplace the newly chosen color. Make sure the sheen is eggshell or satin. Roll on the paint, using the previously used rough-nap roller. Again, dab the chip brush into any hard-to-paint areas. If the paint looks uneven in color or sheen, add a second or even third coat.