Drainage Pipe Installation


Efficient drainage is very important for the sewage system, both for the house and the lawn. A drainage pipe is one of the most important components of the drainage system; without a good drainage pipe, sewage system problems range from leakiness to a bad stench to harm to plants. A poorly laid drainage pipe also makes a fertile breeding ground for termites and insects.

Selecting a Pipe

  • Installing a drainage pipe takes time, effort and planning. It is the key to a good drainage system, which in turn is where proper water flow starts. The first step to installing a drainage pipe starts is selecting the drainage system. There are many kinds available. Select the right type depending on the intended use. For homes, a simple one with perforated or non-perforated ridges will do. For heavier uses, such as for landscaping, an ADS solid pipe is necessary.

Installing the Pipe

  • The next step is to dig trenches from the connecting or the starting point of the drainage system to the end. The starting and ending points, once determined, are the locations into which you have to fit the pipe. The starting and ending points usually span the length of the drainage system, which starts at a place in the house or lawn and ends at an outside sewage receptacle where the water is drained out. Dig the trenches from the start to the end. Once this is done, dig a slope into the trenches so when the pipe is laid, the flow of water is easy and unclogged. It is advisable to keep the formula of sloping at approximately one and a half inches for every 50 feet of running water.


  • The pipe has to be laid into the trenches so it can take water from the start of the drainage system and take it out at the other end. The next step is to cover the trenches up. When done neatly, you can grow grass on this covered area. This means there is no trace of the pipe. This is the hallmark of an efficiently laid drainage pipe.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Install Drain Tile

    Drain tile is one of your home's most important defenses against water damage. Drain tile combined with your foundation's cement footer channels...

  • How to Install Water Pipes

    Whether it is a remodel job or finishing a pre-built home, you will need to install water pipes. One type of tubing...

  • How to Clean Drain Pipes

    Clogged drains are not only hassles, but they can also become expensive. However, not all clogged drains require the assistance of a...

  • How to Unclog Drain Pipes

    Drains become clogged for a variety of reasons. Toothpaste, hair, soap and food can all cause drains to clog. A clogged drain...

  • How to Install a 2-Inch PVC Shower Drain

    Installing PVC sewer pipe for a shower is a fairly simple process once you make sure that the main sewer line is...

  • How to Lay Drainage Pipes

    Drainage pipe is sometimes called French drain pipe. Black and flexible, it comes in 8-inch and 10-inch diameters and 20-foot lengths. The...

  • PVC Underground Drainage Pipe Installation

    PVC is a hard plastic used in the manufacture of household drainage (sewer) and vent lines. The pipe comes in a diameter...

  • How to Stop Sewer Pipes From Backing Up

    Sewage backup can occur when different materials accumulate in sewer pipes. Grease, hair, dirt or any other solid material can build up...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!