Xbox 360 Skins

Save
Next Video:
Xbox 360 Repair FAQs....5

Different skins for Xbox 360s can be bought that have almost any color, design or text to stick on the side of the Xbox 360. Follow the manufacturer's instructions when putting on an Xbox 360 skin with help from a computer engineer in this free video on Xbox 360 repairs and maintenance.

Part of the Video Series: Xbox 360 Repairs
Promoted By Zergnet

Comments

Video Transcript

Hi I'm Dave from Singh Technologies and we're going to discuss the skins that you can put on the outside of your Xbox 360. Basically you can order these to have pretty much any kind of design or color or anything that you want, text, it doesn't matter, printed on a sticker that you can stick on the outside of your Xbox 360. The only thing with these stickers are, once they're on, they're on. There's no room for error when you put them on, you'll get bubbles if you do it wrong. So just make sure that you follow the manufacturer's instructions when you put them on. The skins are also very difficult to remove. There are some tips and tricks to make it a little less painful and one is to get a hairdryer out and run it across the front of the Xbox back and forth until you heat the whole piece of sticker or plastic up that it's on, not too hot to where it's going to melt it, but 80, 90 degrees and keep running it back and forth and then take the edge and try and peel it up and then run the hairdryer right behind it as you're pulling it off of the Xbox. If there is glue residue still stuck on the Xbox after you're done, take a lemon, cut it in half and the citric acid will actually eat the glue off of the plastic.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!