How to Remove a Kenwood Car Stereo

Save
Next Video:
How to Install Car Speakers Yourself....5

The removal of a Kenwood car stereo involves the use of a flathead screwdriver and the stereo keys that came with the stereo upon purchase. Find out how to remove the faceplate, trimming and deck of a Kenwood stereo with help from a car audio specialist in this free video on removing car stereos.

Part of the Video Series: Car Audio
Promoted By Zergnet

Comments

Video Transcript

My name is Teddy, I'll be showing how to remove a Kenwood stereo. The tools you will need is maybe a flathead screwdriver, and then the stereo keys that came with the stereo. The first thing you want to do is start by removing the faceplate, set it off to the side so as to avoid scratching the faceplate. And then remove the trimming that came around it. After that there should be two holes on the side you will want to insert the keys releasing the locking mechanisms for this stereo. Now you can just pull on it, if some resistance is given, you can pry slightly trying to avoid prying on the actual plastic. But on the metal just to help loosen until you can get a firm hand. Once it is unlocked, remove the keys, grab firmly again onto the metal versus the plastic of the stereo, and then remove it. Now on reinstalling the Kenwood deck, you would want to make sure all wires are out of the way of anything that can cut the wires. And make sure you have plenty of room to slide it back in using even amounts of pressure on the side versus the center, and push. Sometimes they may give you resistance, if too much resistance is there to where you will be hurting something. Again, remove the stereo, move the wires so you will have the proper amount of room to work in. And then reapply the faceplate. And that is how you remove a Kenwood stereo from a car.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!