What Are the Benefits of a Dual Mass Flywheel?


A dual mass flywheel is a clutch component used in light-duty trucks and other vehicles fitted with a diesel engine and a manual transmission. The dual mass flywheel dampens the torque produced by a diesel engine, optimizing the engine's output while reducing transmission wear by limiting the amount of vibration and other damaging factors of the shifting process. Dual mass flywheels have many advantages over single mass flywheels.

Elimination of Gear Rattle

  • By reducing or eliminating the amount of transmission gear rattle, a dual mass flywheel provides a quieter ride with fewer vibrations. This is an especially noteworthy benefit for drivers and passengers in light-duty trucks, where the suspension is often tighter to accommodate heavy loads and can lead to excessive vibration and jostling on uneven roads. The application of the dual mass flywheel significantly decreases these factors, providing a more relaxed driving experience.

Reduction of Gear Shift Effort and Damage

  • Dual mass flywheels isolate the spikes in crankshaft torsion that commonly occur in diesel engines with high compression ratios. These spikes would otherwise be a potential source of damage to the transmission gear teeth and could lead to the need for costly repairs over time. In addition to preventing damage, this compensation for torsion spikes also eases the transmission's effort when shifting, allowing for further preservation of the gears and longer transmission life.

Increased Fuel Efficiency

  • Dual mass flywheels benefit transmissions not only by extending their lifespan, but also by allowing more effective and efficient use of the power provided by the vehicle's engine. When the driver shifts into higher or lower gears, the flywheel's dampening effect diminishes the torsion surges or spikes that might otherwise cause the engine to overwork itself and the transmission, optimizing the engine's output at any given speed and producing better mileage per gallon of fuel consumed.

  • Photo Credit pickup truck image by Tonda from Fotolia.com
Promoted By Zergnet


You May Also Like

  • The Advantages of Using a Heavier Flywheel

    The Advantages of Using a Heavier Flywheel. A flywheel is a type of container that can generate and hold energy. Flywheels are...

  • Flywheel Resurfacing Specs

    Flywheel Resurfacing Specs. A flywheel is a heavy wheel usually made of metal that is connected to an automobile's drive shaft. It...

  • What Are the Benefits of Dual Exhaust?

    The benefits of dual exhaust include the ability to allow more exhaust gas to escape the engine with less back pressure. Discover...

  • What Is a Flywheel?

    There are a lot of spinning parts in an engine, but one of the crucial items for helping to produce electricity is...

  • Advantages of a Lightweight Flywheel

    Advantages of a Lightweight Flywheel. The flywheel in a car maintains rotational inertia in your engine as well as helping to balance...

  • How to Calculate Rear Wheel Horse Power

    Even modern motor vehicles with fossil fueled internal combustion engines are relatively inefficient, especially compared with other forms of transportation such as...

  • CRF 250 Dual Exhaust Benefits

    Honda's entry in the 250 cc motocross class transitioned from from the two-stroke CR250 to the four-stroke CRF250. The CRF adopted a...

  • What Is a Flywheel Used for?

    Flywheels are exceedingly common devices, yet are often poorly understood. While they are simple in their overall design, they are integral to...

  • Porsche Boxster Transmission Problems

    The transmission system on the Porsche Boxster Series consists of a six-speed manual gearbox with a dual mass flywheel to reduce engine...

Read Article

How to Clean Your Car Headlights

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!