Tools to Remove Roof Shingles & Nails

Save

The leak from beneath a single faulty shingle can cause costly structural damage, contribute to growth of interior mold and mildew and lead to larger, more costly roof repairs. Replacement of damaged roof coverings prevents a tiny drip from growing into a huge project and, fortunately for the do-it-yourselfer, roof shingle and nail removal requires only basic hand tools. Whether you’re replacing a single shingle or entire roof, learn about the tools of the professionals and choose the ones that suit your project.

Garden Fork

  • Originally intended for agricultural work, the long, thin tines of this common garden tool slide beneath shingles and allow a roofer to pry both shingle and nail from roof sheathing. Like an oversized version of the dinner fork, the garden fork features three to five skinny, flat tines which taper to a pointed tip. Placed nearly flat against a roof’s surface, the tool’s fork-like tines slip under roofing paper, shingle and nails without damaging roof sheathing.

Roofing Shovel

  • Specifically designed for removing roof shingles, the roofing shovel features notches along its front edge and a molded, metal pivot point along its rear. When pushed beneath a shingle, the tool’s V-shaped notches catch and stop against roofing fasteners. The shovel’s pivot point, typically located below the blade’s attachment to the handle, looks roughly like a welded, metal wedge. The shovel’s pivot point acts as a fulcrum, providing leverage and increased prying power.

Pry Bar

  • The pry bar, a miniature, thin-bladed version of the crowbar, removes single shingles and nails. Typically 2 inches to 3 inches wide and ¼ inch to ½ inch thick, the pry bar easily slides beneath stubborn shingles. Like a crowbar, one of the pry bar’s ends curves at a 90-degree angle. The ends of a pry bar often feature a V-shaped, nail-catching notch. To use a pry bar, a roofer slips the tool’s flat side beneath a shingle, pushes until the tool’s notch catches a nail and gently pries the nail free from the roof sheathing. Additionally, the pry bar’s curved end provides increased leverage, perfect for removing stubborn or stuck roofing nails. The “cat’s claw,” an alternative version of the pry bar, features rounded, wedge-shaped ends.

Utility Knife

  • Essentially a heavy-duty box cutter, this tool’s sharpened blade scores shingles and cuts roofing paper during the roofing demolition process. Half of the utility knife’s trapezoidal blade protrudes from a palm-sized, roughly rectangular casing. Specially designed utility knife blades, called “roofing blades,” feature a hooked rather than pointed tip. Roofing blades easily score and tear through composition shingles.

Related Searches

References

  • Photo Credit Garden fork leaning against greenhouse work bench image by Scott Latham from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Remove Roof Shingles

    Typically, shingles on a roof will last about 20 years before they require replacement. This depends on the quality of the shingle,...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!