Types of Water Well

Save

There are three types of water wells: dug wells, driven wells and drilled wells. All three types of wells use a casing, a large pipe inserted into a drilled, narrow vertical shaft, which is held in place with cement. Regardless of type, water wells must be positioned so that rain flows away from it (i.e. on a small hill or knoll, or with a soil gradient sloping away from the well base), so that rainwater containing chemicals and bacteria won't enter the well water.

Dug Wells

  • Dug wells are wells excavated by backhoe or shovel, and are generally only 10 to 30 feet deep. Because they are shallow, dug wells are the type of well most prone to contamination. Features such as watertight concrete casing, a concrete well cap, and a soil gradient which slopes away from the well, all help to prevent dug well contamination.

    In the past, these wells were cased with brick, stones, or tile to ensure a long, sturdy life.

Driven Wells

  • Driven wells run further down than dug wells, averaging 30 to 50 feet in depth. They are often found in areas of sandy or gravel-laden soil, where the ground water table is less than 20 feet from the surface of the ground, making access to groundwater easier.

    Though driven wells are 20 to 40 feet deeper than dug wells, they are still considered shallow wells, and still pose a moderate risk of contamination. A filter is secured to one end of the pipe that is driven down into the soil, in order to filter sediment out of incoming water once the ground water table has been reached.

Drilled Wells

  • Drilled wells have the most depth of the three types of water wells, extending to depths of 100-400 feet, and into bedrock rather than loose soil. They are the most safe from environmental contamination. Drilled wells have to cross bedrock fractures which possess ground water in order to produce a water supply.

    Casings for drilled wells are metal or plastic pipes, half a foot in diameter, extending at least 18 of the 100 to 400 feet down (a minimum of 5 feet of casing pipe has to extend into bedrock). Surface water is prevented from entering a drilled well by means of a cap.

References

  • Photo Credit well image by Czintos Ã--dön from Fotolia.com
Promoted By Zergnet

Comments

Resources

You May Also Like

  • Types of Water Resources

    The total water resources of the earth equal 326 million cubic miles, with each cubic mile equal to 1 trillion gallons of...

  • Types of Water Pumps

    Water pumps are very useful devices in homes and businesses. A few types of water pumps are available on the market, all...

  • How to Install a Deep-Well Water Pump

    Installing a submersible pump is not as daunting a project as it may sound. A deep-well pump set at 500 feet goes...

  • How to Cover Your Dug Well

    Before the use of drill rigs became popular, homeowners often installed dug wells on their property for drinking and irrigation water. Dug...

  • How to Shock Your Drilled Well

    Shocking a well kills the bacteria and viruses present in the water supply. Besides sanitizing the water and making it healthier to...

  • What Kind of Water is Best to Drink?

    With over two-thirds of our body made up of water, it's importance to our health is undeniable. Most of us recognize the...

  • Which Type of Solutes Dissolve Well in Water?

    Water is occasionally described as the "universal solvent," but if you have ever seen a picture of an oil slick after an...

  • Types of Well Pumps

    Well pumps are used to transport groundwater to the surface, where it can then be used for irrigation, drinking and other purposes....

  • Materials Used to Build a Water Well

    There are two primary ways to construct a water well: drilling and digging. A drilled well usually goes far down into the...

  • What Is a Good Water Pipe for a Well?

    Private water wells for home consumption must be safe for all uses. The type of pipe used is a major consideration in...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!