Traditional log construction can be used to create structures ranging from simple cabins to large-scale homes and resorts. Builders join these logs together using special notches cut into the end of each unit, which help to lock the logs together and form a secure and stable design. Different types of log notches affect the appearance, durability and performance of these structures.
Dovetail joints represent one of the strongest and most durable types of notches used in log construction. They are also one of the most difficult to create requiring a high degree of skill. A full dovetail notch features a slanted cut on both the top and bottom of a log, while half dovetail notches are cut only along the top. These cuts are angled so water slopes away from the structure, which helps to reduce the risk of moisture damage over time.
Saddle, also known as cope or round notches, consist of a rounded void cut into the bottom of each log. When used with round logs, this notch fits snugly over the perimeter of the log below, creating a very secure, long-lasting structure. Typically, the notch is cut several inches or even a foot away from the end of each log, allowing the edges of each unit to extend out past the corner to create a decorative effect. Saddle notches represent one of the most traditional and widely-used forms of log joining.
Square, or quarter notches, share many characteristics with dovetail cuts but tend to require less skill to create. Builders cut the ends of each log so they end in a flat, square shape. By stacking the squared ends on top of one another, users can create a structure with clean, neat corners. This type of technique typically requires a nail or screw backup to enhance stability and strength.
V notches resemble saddle cuts, but feature a triangular shape instead of a round one. The triangle peaks upward to ensure adequate water drainage and must be cut into both the bottom and top of each log. Depending on where the X is placed, the corners may take on a clean, square shape or a more complex crisscross design.
Interlocking notches consist of square cuts made near the end of each log. These cuts are made into both the top and bottom of each log, allowing the units to interlock very securely. Because of the complexity involved in these cuts, they are generally made by machines in a manufacturing or industrial shop.
- "Old House Journal": Log Houses in America; J. Randall Cotton; January-February 1990
- "Built In Texas"; Francis Edward Abernethy; 2000
- "Log Home Living; Annual Buyer's Guide: 1998"
- Photo Credit Jupiterimages/Brand X Pictures/Getty Images
Types of Dovetail Joints
Dovetail joints connect framing or panels with wedge-shaped mortise and tenon joinery. In a dovetailed corner, tightly fitting dovetails resist twisting forces...
How to Notch Logs for a Log Home
Log homes were introduced to America by Scandinavian settlers in the early 1600's. Valued for appearance, energy efficiency and economy, log homes...
How to Cut Log Joints
Wood has long been a natural source of building material. Timber logs assemble into one of the most basic examples of a...
Types of Construction Beams & Their Uses
Construction beams are a major part of many different types of construction projects, be they residential, commercial, or public. They provide support...
How to Join Gear Together to Create an Anchor While Top Rope Rock Climbing
Figure eights, cordelettes and pre-equalizing are a few elements that come together when joining anchors. Learn more about rock climbing in this...
How to Join the Binding Strips
Join your binding strips in order to assemble your quilt. Learn more about how to create your own quilt in this free...