Ways to Get Water Out of Your Phone With Rice

Save

For many people, cell phones have become indispensable life tools. Many rely on these phones for business and to keep in contact with family. If something happens to your phone, it can be an agonizing situation when you realize that most of your life is tied up in your phone. But if you happen to drop your phone in a puddle of water or a sink of water as you're doing the dishes, there are ways to keep your phone from being ruined. Rice is a great way to draw moisture from the phone and help dry out the components inside.

Immediate Action

  • The most important thing that you need to do in this situation is to immediately remove the battery from the phone. Don't worry about turning it off, just take out the battery. Then, separate everything on the phone that can be separated, i.e. battery, SD and SIM cards, and anything else that will come apart. The sooner you get the phone apart, the better. Most phones nowadays come with a "water sticker" that manufacturers use to tell if the phone has been in the water. Most of the time this will void the phone's warranty, so don't waste time thinking that you can get it replaced for free.

Drying Your Phone

  • Once you have taken everything apart, we want the phone and its components to dry, and the quicker the better. There are several things that will help speed up the process, but rice seems to be the quickest and most efficient way to dry the phone. You can blow on the phone, shake the phone to get the water out or even use canned air to dry it. Using rice will speed up the process even more. Place rice in a bowl that is big enough to hold the rice and the phone parts. Put the phone in the rice. It doesn't have to be totally submerged. The rice will draw the moisture out of the phone. It is important that you wait until the phone is completely dry before you put it back together and attempt to turn it on. Wait at least 12 to 36 hours, depending on how wet the phone became.

Reassembly

  • After you are sure that the phone is completely dry, you may put it back together. Sometimes moisture that you can't see can get behind the components. Once the phone is put back together, attempt to turn it on. If it does not respond, repeat the rice process for another 12 to 24 hours to make sure that there is no moisture left in the phone.

Warnings

  • Do not attempt to use the microwave or a blow dryer to dry out your phone. You must keep the phone away from extreme heat and out of direct sunlight.

    Do not use any type of alcohol solvents to clean the insides of the phone.

    If you drop your phone in salt water, you need to flush the phone with fresh water before you dry it and take it apart. Remember that salt water can damage the inside of the phone and its components. Make sure you remove the battery before you flush it with fresh water.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!