Difficulty Plunging a Kohler Toilet

Save

Kohler relies on cutting-edge technology and design to make hygienic, environmentally friendly toilets that will last for years. Each flush of a Kohler toilet also helps clean the commode itself, keeping germs at bay while minimizing water waste. Like other toilets, however, the Kohler product may clog, requiring home remedies or professional assistance to get it running again.

Basic Plunging

Before calling a plumber for help, ensure you are correctly plunging the Kohler toilet. Place the rubber lip of the plunger over the opening in the center of the toilet bowl and press down firmly to form a tight seal. Next, pull the plunger back firmly, breaking the seal and loosening the clog. Perform this action several times, re-creating the seal to get the necessary suction to remove the blockage.

Avoid Snakes

A plumber's snake is a long cable that can be fed through pipes with an end resembling a corkscrew that shreds clogs. Even if a toilet won't plunge properly, however, refrain from using a plumber's snake to remove the clog. The fine porcelain of Kohler toilets is easily scratched by a plumber's snake, which is typically used in sinks and pipes where superficial scratches aren't problematic. Instead, This Old House recommends a closet auger, a similar device with a specially covered end to prevent scratching.

Replacement Parts

If a Kohler toilet needs replacement parts to prevent clogs or deal with the aftermath of a particularly troublesome one, they are available directly from the company. Ordering directly from Kohler ensures replacement pieces will fit inside and work properly with your toilet model, eliminating guesswork and the need for returns. For all Kohler toilets made after 1990, service part numbers are printed on the underside of the toilet tank lid, making the order of new parts simple.

Alternatives to Chemicals

Though harsh chemical-laden products promising to remove clogs might be tempting to use on a blocked toilet, steer clear of them. If such products fail to destroy the clog in a toilet, the problem is exacerbated by a tank full of water containing corrosive chemicals. Instead, try carefully pouring a pot of boiling water into the toilet, followed by some dish soap. Allow it to sit for a few moments to work on the clog and try plunging it again.

Related Searches

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!