How to Make a Cardboard Deer Head

Save

While taxidermy and the display of a hunted deer decorates many a wall, a more humane way to display animals is through the creation of a cardboard deer head. This 3D style head is not only a stylish and a different addition to everyday decor, but also simple and economical to create. Making the head out of cardboard also allows for a variety of different finishes to be applied after its creation, from paper to paint.

Things You'll Need

  • Deer head template
  • Printer
  • Scissors
  • 1/2-inch thick plain cardboard
  • Pencil
  • Cutting surface
  • X-Acto knife
  • White crafting glue
  • Craft wire
  • Large needle
  • Spray paint
  • Print out the deer templates. Cut them out using scissors and discard the excess paper from the outlines.

  • Place the printed pieces on the plain cardboard. Draw outlines around them using the pencil. Remove the printed pieces.

  • Set the cardboard on the cutting surface. Use the X-Acto knife to cut out each shape, and discard the excess cardboard.

  • Place glue on the inside edges of the two slots in it - this is where it will attach to the rest of the head. Fit the nose piece at the beginning of the two neck pieces, in the designated slots, one on either side.

  • Hold the neck upright and insert one of the sides of the antler pieces, placing glue around its slot and firmly setting it on the neck. Repeat this with the other antler piece. However, place glue along the inside edge of the antler piece where it will rest against the other to create a secure bond between them. Insert it on the designated slot on the other side of the neck.

  • Line the two slots of the bottom neck piece, the large round one, with glue. Insert it on to the two pieces of the neck where the slots are, fitting it securely.

  • Create a small hole at the top of the large round piece that serves as the mounting board, using the large needle. Feed a small amount of crafting wire through it, but make it enough to hang it on a hook, and tie it at the top. Set it in place with pliers.

  • Line the two slots in the large mounting piece with glue. Insert the bottom of the neck into them. Allow the entire piece to dry for one to two hours, or according to the glue's instructions.

  • Spray the head with the desired color of paint lightly to give it a finished look. Allow it to dry and add another coat if desired or hang it.

Tips & Warnings

  • To create a craft that is very green oriented, use recycled cardboard and eco-friendly glue.
  • Instead of covering it with paint, try spraying each piece with spray adhesive and place the paper on it, and trim the edges with scissors.

References

  • Photo Credit Hemera Technologies/PhotoObjects.net/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Make an Origami Deer Head

    Origami, or the art of folding paper, allows you to create a number of shapes and objects, including animals. Some origami animals...

  • How to Make a Deer Head out of Styrofoam

    If you like the idea of a mounted deer head, but do not actually want the head of a dead animal on...

  • How to Make Cardboard Animals

    Helping kids make cardboard animals is a fun and economical way to spend a rainy day, or any other time when a...

  • How to Make a Jewelry Display Bust

    Jewelry busts are display structures meant for showing off jewelry, usually necklaces. They are crafted to resemble the neck and upper chest...

  • How to Make Deer Sculptures

    Deer sculptures serve multiple functions, as a decoration for the home, target practice for bow and arrows or a child's school project....

  • How to Make Deer Mounting Plaques

    The look of mounted deer heads and antlers is improved by mounting them on a finished plaque. A wide variety of woods...

  • Moose Activities for Kids

    Crafts and activities are a great way for kids to learn while having fun. The moose is a frequently used animal in...

  • Construction Paper Deer Crafts

    To children, deer are among nature's most appealing animals. Shy and graceful, they're all the more interesting because they're elusive and tend...

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!