It is easy to spend hundreds of dollars on an RC car at your local hobby store. However, spending more money on a car doesn't necessarily equate to more fun. There are cheap RC cars available for those shopping on a budget. Although these cheaper cars are often slower and smaller than the expensive cars crowding the aisles of hobby shops, they can still be quite fun. With a few modifications, they can be made to perform as well as their more expensive counterparts.
Things You'll Need
- Brushless motor and speed control
- Battery pack
- Dremel-style rotary tool
Modifying a Cheap RC Car
Replace the stock motor and speed control with brushless units. This should be your first modification when dealing with a cheap RC car. Cheap cars commonly come from the factory with slow, dated electronics. Swapping these out for a brushless unit will instantly increase the car's top speed and power. Before you purchase a brushless setup, make sure the motor is the correct size for your RC car model.
Purchase new batteries to make your RC car perform better. Cheap RC cars typically come with low-capacity batteries that provide poor power and battery life. A high-capacity nickel-metal hydride (NiMH) battery or a lithium polymer pack will give you faster, longer rides.
Switch out the stock tires for ones that match your style of driving. Stock tires usually have multipurpose treads that make them adequate for different driving environments but do not excel on any one surface. If you intend to run on the street, get a set of sticky street tires. If you are going to be bashing in the dirt, buy a set of knobby off-road tires. By matching tires to your intended play style, you will maximize the traction and handling of your cheap RC car.
Cut off excess plastic on the chassis of your car with a Dremel-style rotary tool. Do this only to areas that provide no structural support, such as a battery tie-down or speed control tray. Reducing the weight of your car will increase top speed and acceleration and costs nothing to modify, as long as you have a rotary tool handy.
Tips & Warnings
- Always wear safety glasses when cutting with a rotary tool to prevent eye injuries.
- Photo Credit Ryan McVay/Lifesize/Getty Images
How to Build R/C Drift Car
Drifting is a motor sport that originated in Japan. Drift cars are designed to lose traction in the rear wheels while turning...
How to Make Simple and Cheap Kitchen Cabinets
Having new kitchen cabinets installed is so expensive that it's often out of reach of even the average homeowner. If you can...
How to Repair RC Car Electronics
Radio controlled cars have many different types of electronics, such as the transmitter, receiver, speed controller and even the electric motor. With...
How to Make a New Bright RC Car Go Faster
Building RC cars is a fun pastime that the whole family can do together. There is nothing more fun than watching these...
How to Increase the Speed of a Club Golf Cart
Golf carts are used on public, upscale and private golf courses all around the world. Not only are they seen on courses,...
How to Make a Homemade RC Car Motor
Radio-controlled vehicles are model cars, trucks and aircraft that are driven remotely using a hand-held transmitter, which commands the vehicle using radio...
How Does a Dremel Tool Work?
A Dremel tool works by using the electrical power of a high-torque motor that rotates the bit at either a single speed...